Part # PB314E
By Intermatic
Part # PB314E
Alternate Part #'s _PB314EK, INT-30-808, INTPB314EK
These compact Electronic Timers are specially suited for applications where equipment needs to be cycled ON and OFF up to 8 times per day, and where automatic operation of the equipment requires occasional override by someone other than a qualified service professional. They offer rugged construction, resistance to surges and humidity, operate between wide temperature extremes and come with a 5 year service life replaceable lithium battery. A light indicator illuminates when the timer is in the ON position. Select feature allows timers to be continuously ON, OFF or in AUTO mode.
PB300EK Series Electronic Timer kits are designed for applications where PB Series Mechanical Timers need to be replaced. The connected load must not exceed the ratings of these timers. The kits contain all the necessary hardware for a speedy repair or exchange.
Applications:
• Filter Pumps
• Booster Pumps
• Sprinkler Systems
• Heating Systems
• Lights
• Fountains
• Cleaning Systems
• Security Systems
Is this timer designed to fit into the same plastic encosure as the old Intermatic analog timer?
Reply
Hello Mike. The Intermatic PB314E will not fit the Intermatic T Series (T101, T104) timer box. The P7103ME contains the timer and mounting plate required to make the conversation. Unfortunately, the P7103ME is not currently available through INYO Pools. An internet search identified an in-stock source. INTERMATIC P7103ME Attached please find wiring instructions Model: P7000ME Series Electronic Time Control Mechanisms Please note - this timer has dual voltage capability. Reference the model P7103ME 240 Volt Installation diagram.
Reply
I own an Intermatic mechanical timer model #T104P201 that controls power to my pool pump and heater. The mechanical timer mechanism has failed and I would like to replace it with a digital timer mechanism. I do not need to replace the plastic enclosure or other existing components. Can you tell me which model to purchase? Thanks!
Reply
220 volt - Timer Mechanism, PM Controls, Paragon Repl, 240v, DPST, 24hr Horizon #: 59-239-1000 115 - Timer Mechanism, Precision Multiple Controls, 115v,DPST,24hr Horizon #: 59-153-110
Reply
if my motor is 230v isn't my timer
also 230 and the replacement timer mechanism needs to be for 230V ?
Reply
Hi. That is correct, the timer must be 230 volts in order to operate a 230 volt motor.
Reply
Is this timer pump start capable, or do you need a separate pump start relay?
Reply