By Jandy



Model # 6685

Alternate Part #'s JDY6685

Product Description

The AquaLink RS All Button allows automatic control of your swimming pool and spa. With custom labeled buttons of all equipment you will be able to easily understand and control your pool system. Your swimming pool and spa are your own private paradise and the Jandy AquaLink RS Control System puts that paradise at your fingertips.

  • Simple indoor programming and control of filter pump, heater, solar and up to 7 auxiliary circuits
  • Indoor control of thermostats
  • Indoor display of water and air temperatures
  • Interfaces with Goldline's Aqua Rite Chlorine Generation for convenient indoor control and monitoring of pool sanitation needs.
  • Custom software and decal labeling of all functions
  • Automatic equipment safety circuits and freeze protection
  • Built-in self diagnostics
  • Lockout the complete system, individual devices and Spa-sides from the indoor control panel
  • All necessary relays included

Systems Include: Indoor Control Panel, up to 4 Power Center Bezels with Printed Circuit Boards, 2 Jandy Valve Actuators 24V (pool and spa combo models only), 1 Water Temperature Sensor, and 1 Air/Solar Temperature Sensor and all necessary 3HP relays required to operate system. Systems require one or more power centers, cable or wireless kit.

Click here for more Jandy Aqualink

Product Specifications

# of Circuits System can Control:
Pool / Spa Type:
Pool & Spa

?     Asked on 8/24/2021by Inyo Visitor

All lights are on. Nothing is functioning. Tape reads:6543 REV B01

A  Answered on 12/30/2021 by InyoPools Product Specialist Joe S.

Good afternoon, at this time we do not have a tech manual for that unit. We would recommend contacting Jandy's DEDICATED SUPPORDEDICATED SUPPORT.

?     Asked on 7/23/2019by Bill

Is there an owners manuel for solder model AquaLink RS4 available? The one I have works great but I just moved into the home and the owner had no paperwork and I would like to know how to program it. Thank you


A  Answered on 7/23/2019 by InyoPools Product Specialist Lennox H.

Hi, Bill. The Jandy Controls All Button Owners Manual is available for download. 

?     Asked on 6/25/2019by Ronnie Ballard

i have a blue haven BH6100 control panel with a error code 6700 REV and none of the control buttons are working can you give me some advise on how to get this control panel back to working, had to put the pool in maintenance mode to get filter pump to come on any suggestions to fix?

A  Answered on 10/15/2019 by InyoPools Product Specialist Steve M.

Ronnie, we apologize for the inconvenience, however, we have been unable to obtain an answer to your question from the manufacturer.

?     Asked on 7/2/2018by Sal Orlando

Pool temperature using a pool thermostat does not match pool temperature shown on RS4 display.

A  Answered on 7/4/2018 by InyoPools Product Specialist Lennox H.

Hi, Sal. You can test the Temperature Sensor resistance to make sure that it's functioning properly, if not then it will need to be replaced.

?     Asked on 4/7/2017by Inyo Visitor

Can I set the aqualink to heat the pool and the spa at the same time?

A  Answered on 4/7/2017 by InyoPools Product Specialist Lennox H.

Hi. Yes, it can only if the heater you use have that capability. The heat will have to have a dual thermostat.

?     Asked on 12/11/2015by Inyo Visitor

Where can I get/buy an owners manual.

A  Answered on 12/11/2015 by InyoPools Product Specialist Hector F.

Towards the bottom of this item's page there is a documents portion with two manual links that you can print out.