By Jandy



Part # 7305

Alternate Part #'s 26-295-1203

Product Description

Constructed of the same tough CPVC material used on the NeverLube. Our Check Valve’s clear lid and red seal plate let you easily see and access debris. It features a unique swing/spring design for both return and intake water. The diverter swings completely open with minimal back pressure and no water turbulence.


  • Minimal hydraulic loss
  • Clear lid for easy inspection
  • Easy to disassemble when clearing debris
  • Available in straight-through and 90°
  • Corrosion resistant stainless steel swing
  • Highly resistant to Chlorine

Click here for more Jandy Check Valves

Product Specifications

Inside Diameter:
2 in.
Outside Diameter:
2 1/2 in.

?     Asked on 2/13/2012by Guest

Can this valve be mounted vertically?

A  Answered on 2/13/2012 by InyoPools Product Specialist Patrick P.

Yes, the valve can be mounted vertically. The flow of the water must be moving up. The flow of the water cannot be moving down.


Est. Repair Time

Less than 1 hr

Tools Needed


No Check Valve for New Spa, Water Draining Down When Pump was Off.

Written on 3/7/2019 by Guest

This was a simple install. I measured the valve, cut the spa supply line, and using PVC primer and glue, installed the checks valve in about 15 minutes. This resolved the issue with the spa draining down when the pump was off. Easy DIY

Were these instructions helpful? 


Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews