Model # 347938
Alternate Part #'s PEN347938, PUR-10-397
C Series® High Performance Commercial Bronze Pumps
For commercial and high-end residential swimming pools and other water applications.Available in flows to 740 GPM, and from 5 to 20 HP.
The C Series is a heavy-duty commercial pump specifically designed for large pools, fountains and water attractions that demand high flow rates and continuous operation. With bronze construction and a stainless steel strainer basket, the C Series is perfect for the toughest indoor or outdoor projects. This pump’s lasting efficiency, quiet operation, easy maintenance, and durability has set the standard for mediumand high-head performance in the pool industry for many years.
Available with and without a hair and lint strainer.
- All bronze construction for strength and durability.
- Close coupled for quiet, stable flow.
- Heavy-gauge stainless steel strainer basket, with open area five times the area of the suction port.
- 6 inch suction and 4 inch discharge for maximum efficiency with strainer.
- Closed impeller for longer motor bearing life.
- Heat-resistant seal for operation up to 150°.
- Available in single- and three-phase 50 and 60 Hz models.
- 200/208 and 575 volt models available on request.
- One-year limited warranty. See warranty for details.
- Volute type: Back pull-out design
- Port Size: 6" – ANSI® 125 lb. bolted flange suction port on strainer
- Port Size: 5" – ANSI® 125 lb. bolted flange suction port less strainer.
- Port Size: 4" – ANSI® 125 lb. bolted flange discharge port.
- Material: Volute & Motor Adapter Bronze CA 84400.
- Material: Impeller Bronze CA 83600.
- Material:Base Enamel Coated Cast Iron Foot CL30.
- Corrosion Prevention: All-bronze pump with stainless steel basket for maximum corrosion prevention.
Hair and Lint Strainer
- Material: Strainer pot – Bronze CA 84400.
- Materilal: Strainer – Stainless Steel.
- Size: 6" ANSI® 125 lb. bolted flange suction ports.
Pump Maximum Limits
- Liquid Temperature: 104°.
- Ambient Air Temperature: 104°.Motor
- TY Frame Motor
- Frame size: NEMA® flange. 230/460V are open drip-proof design.
- Shaft: 303 Stainless steel construction.
- Design: 5 to 20 HP, 3500 RPM, JM open drip-proof, continuous duty, three-phase and single-phase (5, 7 ½, and 10 HP only).
- Bearings: Lubricated double sealed ball bearings
- Thermal Overload Protection: All models require external thermal overload protector.
- Power Supply Required: Three-phase pumps are 208/220-440 and 200/208. 5, 7 ½ , and 10 HP Single-phase models are available in 230V, 60 Hz only.