By Pentair Pool Products



Part # K21220

Dimensions 8.5" L x 10.5" W x 41.5" D

Alternate Part #'s KK21220EACH, KPY-201-2285, PENK21220-1

Product Description

40 Inch individual hose section Male/Female for Kreepy Krauly cleaners

Click for more Kreepy Krauly Parts


?     Asked on 6/25/2019by sara

How many 40inch hose comes in a box for $23.99?

A  Answered on 6/25/2019 by InyoPools Product Specialist Hector F.

This is for one original Kreepy Krauly 40 In. hose section for $23.99 at this current time.

?     Asked on 6/13/2017by Gerald

My wife took apart our Krauler hoses last year and I don't know how to set it back up. How many sections of hoses do I use from the hopper to the regulator valve? Which is the correct way the regulator valve faces the hopper (short end or long end)?

A  Answered on 8/5/2017 by InyoPools Product Specialist Alex V.

Gerald, The owner's manual will illustrate how to complete the hose assembly. 

?     Asked on 6/7/2016by bob

how do I get the first piece of hose that is female/female and has a protective sleeve?

A  Answered on 6/12/2016 by InyoPools Product Specialist Lennox H.

Hi Bob, Kreepy Krauly pool cleaner hoses have a female and male end, you may have the Kreepy Krauly 3 Inch Female/Female Hose.

?     Asked on 4/27/2016by Inyo Visitor

Is the 40" hose available in female/female ends?

A  Answered on 4/27/2016 by InyoPools Product Specialist Lennox H.

Hi, A 40" female x female hose is not available, only a 5" Adapter (K21241B).

?     Asked on 2/29/2016by Erica

How long is this hose and how many would I need for a 24 foot round pool

A  Answered on 3/1/2016 by InyoPools Product Specialist Lennox H.

HI Erica, These hoses are 40" long, you would need 10 sections of hose for a 24' pool.

?     Asked on 6/11/2015by gary mccann

I have a 20 by 40 in ground pool. I have the box of 12 hoses. when I hook up the cleaner it only gets about 65% of the pool as it misses most of the deep end of the pool. I have the Kreey Krauly I/G cleaner E1400. I have the two weights that came with it and I have spaced them out on the hose. My question is this. Do I need more hose or weight for the cleaner? I'm thinking more hose. The deep end of my pool is approximately 91/2 ft. deep under he diving board

A  Answered on 6/11/2015 by InyoPools Product Specialist Patrick P.

Hi Gary, A simple rule of thumb for determining how much is needed is to measure from the skimmer (or dedicated suction line) to the farthest point in the pool then add two (2) extra hose lengths. For example let's say you currently have 40' of hose and measure from where you are connecting the hose to the furthest point away and this measures 40' then we would suggest that you need 2 extra 4' sections of hose. I would try a few more sections to see if this resolves the problem.


Est. Repair Time

Less than 1 hr

Tools Needed


Splitting of hoses

Written on 2/25/2020 by Guest

Piece of cake to replace clearly! Mainly just talking about the quality of this particular hose... I have had the best luck with these and highly recommend.

Were these instructions helpful? 


Review Summary

 (Average 4.67  out of 5 stars)
3 Rating
5 star:
4 star:
3 star:
2 star:
1 star: