Model # 702097363
Alternate Part #'s 70-209-7363
The Flyte-Deck II stand is intended for use with 6 ft diving boards. Flyte-Deck II stands possess an outer acrlyic surface that is very durable and should not fade, scratch or rust. Each stand comes complete with S.R. Smith Uni-Mount jig system to help simplify installation.
Available in the following colors:
- Radiant White
- Marine Blue
- Pewter Gray
- Silver Gray
- Gray Granite
What is the three bolt jig dimension of the Flyte Deck Stand?
The Flyte Deck is a 3 bolt jig pattern that takes the shape of a triangle. The distance between the two rear bolts is 6.5". The distance from the rear bolts and the front bolt is 14". All measurements are made "center-to-center."
What hardware kit would I need to secure a board to this base?
The 2-Bolt Hardware Kit comes wit 2 1/2" X 4-*1/2" Carriage bolts, 2 Stainless Steel lock washers, 2 flat washers, 2 brass hex head nuts, 2 plastic caps, 2 plastic recessed mounting washers with caps, and 4 black rubber washers.
What size diving board can I use on my pool?
Page 2 & 3 of this document http://www.inyopools.com/owners_manual/SRSmith_Cat_standard.pdf will give you the minimum residential pool requirements for all of our SR Smith Diving Boards.