$17.50

Qty:

By Jacks Magic


Details

Top

Model # JMSTAINID

Alternate Part #'s JMPJMSTAINID, JMPSTAINID, JMSTAINIDEACH

Product Description

Stain IDentification™ Kit
(STAIN ID KIT) is the first step in performing a successful Jack’s Magic stain removal. The Stain ID Kit is designed to take the guesswork out of removing swimming pool stains. One of the 4 tests will identify what will best remove a swimming pool stain, saving both time and money. Please Note: The water should be at least 65-70 degrees in order to insure accurate testing results. Click Here for our Swimming Pool Stain Removal Guide

Top

?     Asked on 10/25/2012by Guest

How do I remove metal stains from my swimming pool wall and floor?
 Reply

A  Answered on 10/25/2012 by InyoPools Product Specialist Patrick P.

If you are certain that you have metal stains, you can use Jacks Magic Iron,Cobalt & Spot Etching Stuff.
 Reply


?     Asked on 11/1/2012by Guest

Does the water have to be balanced before I do the test?
 Reply

A  Answered on 11/1/2012 by InyoPools Product Specialist Patrick P.

It is  very important to have the water balance so that you get accurate test results.
 Reply


?     Asked on 11/1/2012by Guest

My stain is in the deep end of the pool or on the wall. Can I still use the ID kit?
 Reply

A  Answered on 11/1/2012 by InyoPools Product Specialist Patrick P.

There are a few different ways to use the kit. You can sprinkle a small amount of each packet into the water. As the product dissolves it becomes a solution that is heavier than the water. The solution will then sink to the bottom and should begin to react with the stain. Another method is to put a small amount of the test into a sock, attach it to your vac pole and hold it directly over the stained area.
 Reply


?     Asked on 10/8/2013by Guest

I have a Nature 2 System (or mineralization) and I have stains in my pool. What should I do?
 Reply

A  Answered on 10/8/2013 by InyoPools Product Specialist Patrick P.

First you should do The Stain ID Kit to determine whats needed to remove the stains. Once youve determined what will work, you will need to remove the Nature 2 System while doing the treatment.
 Reply


?     Asked on 6/16/2016by Barbara Smith

we treat it and it comes back...we know it's iron but we can't get it to go away...we bought Ascorbic Acid Powder but it only helps for a few days and then returns
 Reply

A  Answered on 6/16/2016 by InyoPools Product Specialist Scott W.

Jacks is good occasionally but if you do it too much it'll damage the surface of your pool. I'd recommend Metal Free by Natural Chemistry. A lot less harsh and it's safe to swim in. It will eliminate the metals in the water before the stains occur.
 Reply


Top

Review Summary

 (Average 4.34  out of 5 stars)
9 Rating
5 star:
 
(5)
4 star:
 
(2)
3 star:
 
(2)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews