Part # 372162113
Dimensions 17" L x 9" W x 8" D
Alternate Part #'s 3721621-0385V, 3721621-13, PF-40-2N22C, 34-270-3596, WW372162113, WWP-10-1452
When matching pumps always use AMPERAGE rather than Horsepower. Many times the labeled Horsepower does not accurately represent actual horsepower.
The Executive 56 Frame Spa Pump has an executive wet end designed for 56-Frame motors along with two double-shielded ball bearings with moisture-resistant grease for quieter operation and long life. The dual speed motors have insulated windings for increased efficiency and large, highly versatile 6-1/2" diameter wet end for higher head pressure. A split capacitor (start and run) allows for less energy consumption.
Spa Pump Features:
|Speed||2 Speed (2-Spd)|
|Drain Plug Location||3,6,9 o`clock|
|Suction Connection Type||Male Buttress Thread (mbt)|
|Suction Pipe Size||2-1/2"|
|Discharge Connection Type||Male Buttress Thread (mbt)|
|Discharge Pipe Size||2"|
|Motor Frame||56 Frame Thru-Bolt|
Waterway, a leader in spa, bath, and pool products, provides the reliable Executive 56 spa pump for a great value. Executive 56 pumps are energy efficient and produce high-end performance. The wet end of each pump has the ability to rotate, offering an easy, no hassle installation.Specifications
I am trying to replace this pump.
WaterWay Executive 56
This pump was installed in 2011. See picture. The model number does not match up exactly to the one on the website.
Looking for a pump model#6500-263. If you need more info please text me back, thank you.
Hello Danny, based on this information the AquaFlo Gecko Alliance XP2e Spa Pump 5HP/4OP.HP 230V, 2SPD, - 34-402-5254 is the replacement pump
Do ya have a pump with discharge comes out the side instead of top
Hi Dave, The discharge on this pump can be rotated so it goes out the side. Could you email us a few photos of your pump? As this could help us reccomend the proper replacement. To supply the photos simply click the reply link below to upload your photos.
I need to replace my spa pump and motor. My old part is a century lasar pool/ spa cat BN62 part number 7-184821-04 frame y48y. What model do I need?
What is the amp rating for this motor? Will this replace my 2 speed/230v Intertech motor and pump on my Jacuzzi spa? The Intertech amp rating is 12/4.4 amps. What's the difference between a 48 frame and a 56?
Hi. The amp rating of this pump is 12.0/4.4 at 230 volts. The difference between a 48Y and 56Y frame is the diameter of the motor body. The 56Y motor is larger than a 48Y frame motor. This pump can be used depending on the Intertech Pump model and configuration.
i need to replace a pump and motor, which one do i need.
old item: part # 8 -187563-02 (RPM3450/1725
Based on that model number the replacement motor would be part number B235. Now if you need the complete pump then we would need the specific model number or name of the front pump housing that the motor bolts to, You can provide that information or images of it if you are not sure through our support request page if you need further assistance.