Part # 4600-4689
Manufacturer Code 154689
Dimensions 3" x 7/8"
Alternate Part #'s 15-4689, 15-4691, 154689, 154691, 17-110-1468, 25357-154-000, PAC-051-2849, PAC0512849, PEN154689
Air Bleeder/Tee Assembly by CMP Replaces (154689) used on the Triton II, Mitra, Mytilus, PF, and Nautilus INS filters.
I need a complete assembly including pressure relief gauge and hardware for a Triton II sand filter. The bleeder assembly # is 15-4691. Do you have the complete assembly with hardware and gauge available or do I need to buy individual parts?
Hi Scott - we do not have a kit with everything for that bleeder valve, so you will need this Air Relief Assembly for Pentair Triton II, a Pressure Gauge, Rear Mount and an Air Bleeder w/O-ring - 272515. Be sure to put some lubricant on the o-rings so it will last a long time. We also made this guide on How To Replace an Air Bleeder Assy on a Pentair Triton 2 Sand Filter to show you how it is done.
I have a old (prior to 1992) pac fab nautilus NS36 filter. I need the air bleeder and pressure gauge. Can you please give me the part number for these parts. Does this one 154689 replace it?
This item shows the air bleeder included in the photo. Is it included in this assembly as part of this item? or do I have to purchase it separately?
Hi Deborah, yes the actual air bleeder valve itself is included in this assembly.
I just installed a new air bleeder/tee assembly (154689) with new pressure gauge (190059), and is now leaking from spot where gauge threads into assembly. I could possibly tighten a bit more but don’t want to crack the plastic assembly. Any recommendations, or is an o ring needed?
Hi Kenneth, I would suggest starting with using teflon tape on the gauge threads to help prevent that leak.
I bought a Pentair II 140 at the end of last year and the gauge is not working and the bleeder is VERY hard to open and close. I have to use a towel and use way to much force to open and close the bleeder. How can I get these replaced under my warranty? Thanks 319-321-9255
Hi Rose, as long as your unit falls within the manufacturer warranty policy parameters please contact the retailer that you purchased the unit from to initiate a warranty claim.
May this part be used on heldor clearflow de36 filter? original part#154689, 154700, 154661 (air bleeder/tee assembly, adaptor-brass air bleeeer, oringt air bleeder adaptor
Hello, Yes, it will fit. This is the 154689 air bleed.
Is it likely that this needs to be replaced when water is pouring out of it and the filter pressure is fine, it threads into place easily and it was taped?
Hi Jim, This assembly may need to be replace or just the o-rings depending on where it's leaking from. This air assembly can be used on several different filters so you will have to locate your exact model and get the o-ring also just in case.
Less than 1 hr
Fortunately we were able to contact INYO Pools and they directed us to a link diagram for the old model part, then they shipped one to us. This part saved us replacing the entire pool filtration system, saving literally thousands of dollars!