Part # 4600-1805
Manufacturer Code 191805
Dimensions 22" L x 22" W x 2" D
Alternate Part #'s 191805, 14-110-1917, PAC-051-1785, PEN191805
Clamp Assembly Band Ring - 191805
My filter housing is a Purex Triton CFW Series, I measured the diameter and it is 58" will this band work for this housing?
Hi Scott, unfortunately, this clamp is no longer manufactured with no replacement. You may be able to locate a used one from a local service provider or consider replacing the entire filter with a Pentair Clean and Clear series cartridge filter.
I have an old Slyvan pool with an America Products 48 sq ft filter. I t might be a Titan model.
I would like to replace the band clamp assembly and o-ring. It is a stainless steel filter.
Would you have the correct band for this?
Not enough information to correctly identify this Is there a label Is this a cartridge sand or de filter. Could you email us photos?
I will try to send a picture via another message. It is a DE filter. Model no> 584090. The following numbers are for the clamp. 6715-0405, 530030, 982010300. These numbers afe in the paperwork that camr with the pool but they appear to be general rather than for this precise filter. The circumference is 56 3/4.
Correction to my earlier question. The filter is a Pac Fab Nautilus 60 sq. ft., 50 GPM DE tank. The existing clamp appears to be 18 inches in diameter. Will this clamp assembly ring fit (it appears to have a greater diameter).