Part # 3525-10

Manufacturer Code 79105100

Dimensions 0.76" X 0.19"

Alternate Part #'s 3011224, 79105100, AMP3011224, 57-110-1108

Product Description

Clip, Brass Retainer (79105100)


?     Asked on 6/26/2017by Tom

Do you have replacement part for 3525-10

A  Answered on 6/27/2017 by InyoPools Product Specialist Stacey M.

Hello, I apologize, but this is no longer available on our site and we do not currently have a replacement for this.

?     Asked on 11/13/2014by Tom Collins

Clip Brass Retainer 79105100 Part # 3525-10 . Could you tell us what size hole is in this clip ? By the picture it looks like the clip we need . Thanks

A  Answered on 11/13/2014 by InyoPools Product Specialist Brian M.

Hello Tom - I spoke to the technical help at Pentair and they said " the hole size is .200 , the length is .75 and the thickness is .187. I hope this helps


Est. Repair Time

Less than 1 hr

Tools Needed


1     0

Broken Pool Light Clips causing water to enter into the light.

Written on 6/29/2020 by Guest

Shut off circuit breaker for pool light. Remove light from pool and take light completely out of the pool.

Unscrew all of the clips and might as well replace all of the clips while you have the light is out of the pool. Replace light bulb and pool light gasket to insure everything is new while you have the light out of the pool. Firmly tighten the clip screws back to the light and return the pool light into the pool. Turn circuit breaker back on. Should take you under 45 minutes to complete if you have all materials with you.

Were these instructions helpful?