Details

Top

Part # 6230-25

Manufacturer Code 003766F

Dimensions 2-3/16" x 1"

Alternate Part #'s 003766F, 47-197-1430, RAY1516209, RAY003766F

Product Description

USED ON RAYPAK RP2100 SERIES With CAST IRON HEADERS INCLUDES: (1 SET) 062236B FLANGE GASKET FOR 1-1/2"(SET OF 2) (1 SET) 800080B FLANGE GASKET FOR 2" (SET OF 2) (2) CAST IRON INLET/OUTLET FLANGES (4) FLANGE BOLTS SPECIAL NOTE - RAYPAK DOES NOT SELL THE FLANGE BOLTS SEPERATELY BUT OUR NUMBER 5110-15 IS A PERFECT REPLACEMENT THIS BOLT IS EXACTLY THE SAME AS THE RAYPAK FLANGE BOLT, EXCEPT THAT THE 5110-15 IS STAINLESS STEEL, WHICH IS BETTER THAN THE ORIGINAL

Top

?     Asked on 1/27/2018by Max J Reynolds

I am looking at your image of Part No 6230-25 which shows the kit including the cast Iron Headers and the gaskets. I do not need new cast iron headers. I do need the gaskets only that fit these headers. (i.e. 1 1/2 inch pipe diameter). Can I buy only the gaskets and what do they cost?
 Reply

A  Answered on 1/29/2018 by InyoPools Product Specialist Megan C.

Yes, the Gasket, Flange 1 1/2in (2 Per Pkg) (062236b) are available to order. 
 Reply


?     Asked on 6/14/2018by Paul

I have a Raypak Versa Model E 165-WG-N The parts diagram on this site for the 155 and 185 look very similar to my unit. My flange part number is 351002. Is this flange available or will the flange in this kit fit?
 Reply

A  Answered on 6/14/2018 by InyoPools Product Specialist Lennox H.

Hi, Paul. I was unable to locate a Raypak Versa Model E 165-WG-N in the Raypak Parts Catalog. I'm unable to confirm if this Flange Kit will work with that model. You email pictures of your unit so that we can try to confirm. 
 Reply


?     Asked on 5/30/2019by Julio M Cervantes Villarreal

I need only 1 flange with the gaskets My heater is a tledyne laars EPG325 serial number E90226T9R If you can sale and it fit how much will be the price including ground ups to Hidalgo Tx 78557
 Reply

A  Answered on 5/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Julio, Unfortunately, we're unable to provide you with the proper Flange Kit - R0031900 for your Laars EPG325 heater.
 Reply


Top
Difficulty

Est. Repair Time

More than 8 hrs

Tools Needed

Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Adjustable Wrench

Both front and rear header manifolds cracked and were leaking.

Written on 1/16/2023 by Gary M.

I decided to rebuild the entire RayPac pool heater replacing all components except the skins themselves. Replaced both the front and rear headers/manifolds,along with all new gaskets. Replaced all the sensors; the gas valve; the unitherm governor kit; the pressure relief valve; the drain cock; the sensor well kit, and the bypass valve. I ordered the parts from INYO pools and they had everything in stock except for one item. All replacement parts fit and are performing as intended. I had help with the backend plumbing coming from the pool pump and rebuilt all that as well.

Were these instructions helpful?