Part # 5074-27A
Manufacturer Code 073127
Dimensions 4.94" X 0.435"
Alternate Part #'s 073127, 25305-127-000, 66717, 73127, PUR1012756, S17095, V20-202, 35-612-1410, CMP25305127000, PUR-101-2756
Replacement Impeller for the Pentair Whisperflo pump. 3/4 HP Full Rated & 1 HP Uprated - 073127
Frequently Bought with this Impeller
RTV Silicone (For Gluing Seal Into Plate)
My Impeller is stuck, how does it come off?
Reply
You can take a look at our how to guide here: http://www.inyopools.com/HowToPage/how_to_replace_a_pool_pump_impeller.aspx.
Reply
I have a purex triton evenflo model # 38448-600 serial 3 pf 108c00
Will this part work.
Reply
I am showing the 38448600 is the 2 HP Purex Triton Ultra Flo and would require the 2 HP Ultra Flo Impeller.
Reply
1 to 2 hrs
Screwdriver, Wrench Set
didn't have a good strap wrench and broke a perfectly good impeller ! [ the noise was from a bad motor ball bearing [ $8] and easy to replace . It was for a Century 1 hp motor on a Pentair whisper flow pump. about 2 yrs old [ why did it go bad ??],
The Most Recent Reviews
(5 out of 5 stars) Quality impeller
Reviewed By: poolcp ()
High quality and fair price for this impeller. Fit my EOM part identically. Trust INYO again!
Was this review helpful to you?
(5 out of 5 stars) WhisperFlo Pump parts
Reviewed By: LeeD from Orlando, FL ()
Cons: None
Received the correct parts in a timely fashion
Was this review helpful to you?
(5 out of 5 stars) quality part
Reviewed By: Norm from Milton, FL ()
Purchased to have on hand
Was this review helpful to you?
(5 out of 5 stars) Replace as part of routine pump rebuild
Reviewed By: Bruce P. from Berkeley, California ()
I replaced the diffuser assembly and impeller in my pump after years of operation, when it seemed to become weaker. The impeller had debris in the ways and erosion of the stem against the brass seal of the diffuser. After the replacement, it worked fine. To remove the impeller, it will be necessary to take the back off of the motor so that you can immobilize the motor shaft. Once you do that, remove the screw in the center of the impeller, and then unscrew the impeller from the shaft. Note the backwards threads! That's so that things won't come loose as the motor rotates.
Was this review helpful to you?