Pentair Pool Light Face Ring Assembly S.S. 10" - 79110600

$69.99

IN STOCK
FREE SHIPPING

Part # 3525-15

By Pentair Pool Products

  5 Average  

Details

Top

Part # 3525-15

Manufacturer Code 79110600

Dimensions 10" X 7-1/2"

Alternate Part #'s _79110600, 3525-15, 603552, 788379651206, 79110600, AMP-301-1232, AMP3011232

Product Description

INYO # 3525-15 PENTAIR/AMERICAN PRODUCTS #79110600 GENERAL DESCRIPTION: THIS IS FACE RING USED ON THE PENTAIR AMERLITE MATERIAL: STAINLESS STEEL SHAPE: ROUND OUTSIDE DIAMETER: 10-1/8" (A) INSIDE DIAMETER: 7-1/2" (B) THICKNESS: 1/2" THIS IS RING IS STAINLESS AND FAIRLY FLAT ON THE FRONT. THERE IS PATTERN ON THE FRONT AND 9 HOLES. THE TOP HOLE IS WHERE THE RETAINER SCREW FITS. THERE IS A CLIP ON THE BOTTOM TO HOLD THIS INTO THE NICHE FACE RING, AND 6 CLIPS WHICH MOVE TO HOLD THE CLAMP RING. MARKINGS: "CAUTION, RISK OF ELECTRIC SHOCK, ETC" IS MADE INTO THE FRONT INCLUDES: FACE RING AND RETAINER SCREW

Top

?     Asked on 2/28/2022by David C

Hello, I have been having issues with my Pentair Pool Light. I believe the Series is 600019, 600020, 600037 based on the label and this light has been leaving and allowing water to get into the interior of the light. I have replaced the Gasket around the glass but it's still leaking. Would you mind letting me know if this SS faceplate will fit my Pentair and if I need to add lubricant around the rubber seal for a better seal and should I also purchase a new lock ring for it as well?
 Reply

A  Answered on 2/28/2022 by InyoPools Product Specialist Rich N.

Hi David, this Face Ring Assembly S.S. - 79110600 will fit your Pentair Spectrum Amerilite (SAM) Light.  Whenever a bulb is replaced, we recommend installing a new gasket and putting lubricant on it to help it seal and last a long time.  The gaskets get compressed over time and are not intended to be reused.  Generally, the lock ring does not need to be replaced unless it is damaged.  
 Reply


?     Asked on 11/5/2021by Dani Allen

Will this replacement fit a Pentair 79206700 or 79208900?

 Reply

A  Answered on 11/5/2021 by InyoPools Product Specialist Stephen B.

Than you for contacting Inyo Pools, Dani this is the correct face ring for your light.
 Reply


?     Asked on 9/15/2021by Gary Wysocki

Hi All, Would this be the face plate for a 20 year old Pentair SAM light?
 Reply

A  Answered on 9/15/2021 by InyoPools Product Specialist Rich N.

Hi Gary, yes, the Face Ring Assembly S.S. - 79110600 will be perfect for your Pentair SAM light.  We recommend a new lens gasket if you are taking this apart and be sure to put some lubricant on the new gasket to ensure a long-lasting, leak-free installation.  
 Reply


?     Asked on 9/3/2021by Gary Wysocki

Hi, Will this work with a Pentair SAM light from 2002?
 Reply

A  Answered on 10/14/2021 by InyoPools Product Specialist Megan C.

Yes, the Face Ring Assembly S.S. - 79110600 is correct for the SAM light. You will need to replace the Lens Gasket 8-3/8" - 79101600 anytime you open the fixture. We also offer the generic Lens Gasket - 79101600 - O-170 Here is the link to the complete parts page to the Pentair Spectrum Amerilite (SAM) Light https://www.inyopools.com/pool_parts_pentair_spectrum.aspx 
 Reply


?     Asked on 8/30/2021by Paula

Will this work on a Pentair 784 788 789 light? Thanks.
 Reply

A  Answered on 12/29/2021 by InyoPools Product Specialist Joe S.

Good day, yes the Pentair Pool Products Face Ring Assembly S.S. - 79110600 would work with PENTAIR AMERLITE 7845XXXXX, 7885XXXXX, 7895XXXXX SERIESPREVIOUSLY SOLD UNDER AMERICAN PRODUCTS.
 Reply


?     Asked on 8/29/2021by Jerry G Shaffer

is this part stainless?
 Reply

A  Answered on 10/12/2021 by InyoPools Product Specialist Joe S.

Yes, the Pentair Pool Products Face Ring Assembly S.S. - 79110600 is Stainless Steel.
 Reply


?     Asked on 6/29/2021by Inyo Visitor

I am looking for a Hayward inground pool light cover. It's the outside face rim that goes over the light. I have a Modelsp0583l30 light
 Reply

A  Answered on 6/29/2021 by InyoPools Product Specialist Patrick P.

Hi, That part can be found on our Hayward Astrolite Parts Page. Please click this link to view or purchase that part Hayward Astrolite Parts Page
 Reply


?     Asked on 4/28/2021by Sylvain

I have a Pentair amerquartz underwater light assembly. p/n 99101600. The metal part in which the pilot screw goes in is broken which means the light assembly is lose in the niche . What parts would I require to fix this Thanks
 Reply

A  Answered on 4/28/2021 by InyoPools Product Specialist Matt S.

If the mount for the pilot screw is damaged, you may use a light wedge (3583-0) to secure the light
 Reply


?     Asked on 3/30/2020by Inyo Visitor

What is used to fill the other screw holes with? THIS IS RING IS STAINLESS AND FAIRLY FLAT ON THE FRONT. THERE IS PATTERN ON THE FRONT AND 9 HOLES. THE TOP HOLE IS WHERE THE RETAINER SCREW FITS.
 Reply

A  Answered on 3/31/2020 by InyoPools Product Specialist Lennox H.

Hi. Nothing is used to fill the other holes in on this face ring. Those holes are there so when installing it into the niche in a filled pool it is easier to push into the niche. 
 Reply


?     Asked on 8/14/2019by Linda

I know you use SS but is it solid SS or is another product used in it and just plated with SS?
 Reply

A  Answered on 8/16/2019 by Industry Professional

ITEM IS LISTED BY THE MANUFACTURER AS STAINLESS STEEL.
 Reply


A  Answered on 8/15/2019 by Industry Professional

We believe it is solid as we see no evidence of it being plated.
 Reply


?     Asked on 8/11/2019by Linda

What type product is the face ring assembly made of in a new Pentair IntelliBrite 5g Color Pool Light? ie: Stainless Steel; brass or what?
 Reply

A  Answered on 8/14/2019 by InyoPools Product Specialist Lennox H.

Hi, Linda. The face ring is made using stainless steel.
 Reply


?     Asked on 6/16/2019by Erin

Is this face plate compatible with Swimquip 5086 light?
 Reply

A  Answered on 6/16/2019 by InyoPools Product Specialist Lennox H.

Hi, Erin. Unfortunately, it will not, only the Face Ring - WC203-52SS is compatible. 
 Reply


?     Asked on 6/15/2019by Harry

I have the same unit as John above, Aged Amerlite with brass face plate. I would replace the entire unit but the cable run is torturous and impossible to pull . Will the SS face plate with locking ring work on this old unit? thanks

 Reply

A  Answered on 9/30/2019 by Industry Professional

Yes, Pentair Pool Products Face Ring Assembly S.S. - 79110600 would be correct.
 Reply


?     Asked on 5/10/2019by john

My 50 year old pool light is a American Product model 3915, which has the Chrome/Brass finish, and has been deteriorating where there are black powder stains around the pool light ring on the wall of the pool. Can I use the existing light bulb Cone with its electrical cable, and the Chrome/Brass ring matting ring inside the pool wall, or replace everything? Pictures attached. Thank You. John

 Reply

A  Answered on 5/10/2019 by InyoPools Product Specialist Lennox H.

Hi, John. With a fixture that old, I recommend replacing the entire unit. You can use the Pentair AmerlitePentair IntelliBrite, PureColors Kit, and or the ColorSplash fixture can be used as replacements.
 Reply


?     Asked on 8/14/2018by Tim

Hello, I have an Amerlite 784 series aboveground lite with stainless steel face ring although it looks more like a chrome face ring to me. The Stainless steel or chrome face ring has worn away in spots to reveal exposed metal. I think this exposed metal is staining my aboveground pool liner. I've used citric acid in the past to clean the stains but they always come back. Never had this problem until the face ring started to deteriorate. What face ring part do I need for replacement? Thanks!
 Reply

A  Answered on 8/17/2018 by InyoPools Product Specialist Lennox H.

Hi, Tim. This is the correct replacement Face Ring Assembly for your series number, you will also need the Unitension Wire Assy. - 79111000 and the Guardian Silicone Lens Gasket - LPL-G-P or the Amerlite OEM Lens Gasket - 79101600.
 Reply


?     Asked on 7/22/2017by Jim Ott

Hi, I have a American Products Model R-300 BC (12V) pool light. Will this ring replace the original ring? Thanks, Jim Ott
 Reply

A  Answered on 7/22/2017 by InyoPools Product Specialist Lennox H.

Hi, Jim. Yes, you will need this Face Ring along with the Unitension Wire Assy. - 79111000.
 Reply


?     Asked on 7/6/2017by Gustavo

From the previous answer to Frank I have the same problem and I understand that I need to buy the items 15 and 16 but what about the items 14, 7 & 2? Thanks
 Reply

A  Answered on 7/9/2017 by InyoPools Product Specialist Lennox H.

Hi, Gustavo. KEY # 14 is included with KEY # 16. You'll definitely need KEY # 7 but KEY # 2 can be reused. 
 Reply


?     Asked on 6/15/2017by Frank

I have a very old Amerlite pool light with the screws and hold down tabs to hold the body to the glass and face plate and need a new face plate. Do you have a face plate that will replace the old one?
 Reply

A  Answered on 6/15/2017 by InyoPools Product Specialist Patrick P.

Hi Frank, you will require key #15 & #16 from this Amerlite Parts Diagram this will upgrade your light to the new face ring. I did this exact repair to my father's light and the new ring is a much better design than the old tabs.
 Reply


?     Asked on 5/8/2017by Jaxson

Can you please tell me which niche (for concrete pool) would this face ring fit onto (to be used with a speaker)??
 Reply

A  Answered on 5/9/2017 by InyoPools Product Specialist Lennox H.

Hi, Jaxson. You can use the Pentair Large Plastic Niche - 79206700 or the Pentair Large Stainless Steel Niche - 78210500.
 Reply


?     Asked on 5/8/2017by Jaxson

Hi, will this face ring fit on the Hayward Large Plastic Pool Niche Concrete (SP0600U)?
 Reply

A  Answered on 5/8/2017 by InyoPools Product Specialist Hector F.

No, this face ring is specifically designed for the Pentair Amerlite, Amerquartz, Spectrum, and Intellibrite series lights.
 Reply


?     Asked on 4/10/2017by Evan Macaluso

I have this light fixture but have somehow lost one of the metal clips that hold the Unitension Ring to the face plate. Is there anyway to replace just one clip? I don't see them anywhere on the parts list. I hate to spend 70 bucks for a whole new face plate when all I need is one $2.00 clip.
 Reply

A  Answered on 4/11/2017 by InyoPools Product Specialist Stacey M.

Hello Evan, I apologize, but the clips are attached to the face ring.  You can contact Pentair 800-831-7133 to see if there is an individual part they sell for this.
 Reply


?     Asked on 6/29/2016by Randy

Would this face ring work on an old Purex Underwater Lighting Fixture, Wet-Niche Type No. D-426,317 - Model 100-5LW - Forming Shell #425 - 120v - 500w? The chrome plating is coming off the original face ring, and it is rusting.
 Reply

A  Answered on 7/4/2016 by InyoPools Product Specialist Lennox H.

Hi Randy, This Face Ring will not work with the Purex light fixture.
 Reply


?     Asked on 9/10/2015by Inyo Visitor

The Pentair Amerlite pool light parts information states that the chrome faced version of the ring face assembly is no longer available & should be replaced with 3525-15 & 3525-16. But the old chrome faced version did not have all the holes that the 3525-15 plate has. How will these extra holes in the ring face assembly be handled with doing the final installation of the ring (with attached light assembly) to the pool wall?
 Reply

A  Answered on 9/15/2015 by InyoPools Product Specialist Lennox H.

Hi, The additional holes on the S.S. Face Assembly Ring would not play apart in the installation. The pilot screw would positioned at 12 o'clock when installed.
 Reply


?     Asked on 5/12/2015by henry h

I have a light similar to this. The clip in the niche that the screw threads into to hold the light fixture has snapped off. Is there a repair kit?
 Reply

A  Answered on 5/12/2015 by InyoPools Product Specialist Patrick P.

Hi Henry our Universal Pool Light Wedge should fix your issue.
 Reply


?     Asked on 4/30/2015by Don Evans

I need a face plate for my pool light. the P/N is 78441100 serial # is 0407123100282C,
 Reply

A  Answered on 5/1/2015 by InyoPools Product Specialist Patrick P.

Hi Don, This would be the correct face plate for your 78441100 Amerilite. You may also view all of the Replacement Parts for the Pentair Amerilite here.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews