By Pentair Pool Products


Details

Top

Part # 2824-020

Manufacturer Code 520556

Dimensions 8-3/4" X 5"

Alternate Part #'s 520556, 42-110-1024, PAC-45-0556, PEN520556

Product Description

Pentair Intellichlor Power Supply

Top

?     Asked on 6/15/2017by ben flowers

will model 520556 work with a ic40 and ic20 pentair intellichlor salt genator
 Reply

A  Answered on 6/18/2017 by InyoPools Product Specialist Hector F.

Yes, this power center will work for both model cells.
 Reply


?     Asked on 6/20/2017by Inyo Visitor

what size is the fuse for the intelliclor
 Reply

A  Answered on 6/29/2017 by InyoPools Product Specialist Lennox H.

Hi. This Pentair Intellichlor Power Supply uses a 10A 250V Fuse. 
 Reply


?     Asked on 6/20/2017by Dave

I had Pentair IntelliChlor power Center salt system installed 5 years ago. Recently I noticed there were no green lights illuminated on the electronic chlorine generator. We have had several electrical storms recently and thought the power center may have been hit. I opened the box to see if the LED light was on. It was not . I checked the fuse .It was fine I am not getting any power in the power center. Likely Cause?? What is your Recommendation. Thanks Dave
 Reply

A  Answered on 8/31/2017 by InyoPools Product Specialist Andy O.

Dave- It sounds like the power supply would definitely be the issue.
 Reply


?     Asked on 9/15/2017by CJ

Photos of the Intellichlor Powercenter don't appear to show the 4 conductor quick connect on the bottom to which the cell power supply cable connects. I can see the fuse holder cap, but the other holes look to be plugged. Will additional parts be required or is the quick connect installed?
 Reply

A  Answered on 9/15/2017 by InyoPools Product Specialist Lennox H.

Hi, CJ. The port for the cell is apart of the Intellichlor Powercenter. 
 Reply


?     Asked on 10/9/2018by Inyo Visitor

Do you have to buy the fuse holder when you buy a new Powercenter
 Reply

A  Answered on 10/9/2018 by InyoPools Product Specialist Lennox H.

Hi. The fuse holder assembly is included with this Power Center. 
 Reply