Indoor Stack Kit, R266A, R267A - 009839

$187.99

IN STOCK
FREE SHIPPING

Part # 6238-121

By Raypak

  5 Average  

Details

Top

Part # 6238-121

Manufacturer Code 009839

Alternate Part #'s 009839, RAY009839

Product Description

INDOOR STACK KIT, R266A, R267A

Product Specifications

BTU:
266/267 BTU
Top

?     Asked on 10/1/2021 by Michael Sommerfield

The heater kit you show for my Raypak 266A consists of a stack, a square plate with a hole in it and 3 clips. Does the square plate go on the inside just above the coils or does it sit on top of the heater. My Raypak 403A that I am replacing was equipped with an outdoor stack but it had a square plate on the top of the heater and one inside the heater just over the coils which supported the stack. I'm somewhat confused.
 Reply

A  Answered on 10/7/2021 by InyoPools Product Specialist Craig C.

Hello Michael.   Raypak has an Installation Video on their Raypak YouTube Channel - Indoor Stack for Gas-Fired Heaters.  Raypak® Indoor Stack for Gas Fired Heaters - Training Video    Attached please find the Installation and Operation Manual for the Raypak Gas Heater Model 266A.  Please note the information contained on page 11.    INSTALLATION AND OPERATION MANUAL
 Reply


?     Asked on 10/18/2018 by Beau

Would this fit my P0280N raypak gas heater? I need to convert from an outdoor heater to an indoor heater. I am in sydney australia also. Thank you, Beau
 Reply

A  Answered on 10/18/2018 by InyoPools Product Specialist Lennox H.

Hi, Beau. I was unable to locate any info confirming if this Indoor Stack Kit will fit model # P0280N because that is an Australian model. 
 Reply


?     Asked on 6/8/2015 by Walter Plonski

My original heater had 8" stack. The R266A calls for 7" draft hood. If I purchase your 6238-121 stack kit, is there adaptor that goes from 7" to 8" so I can adapt it ro my roof stack, if so do you stock it?
 Reply

A  Answered on 6/12/2015 by InyoPools Product Specialist Lennox H.

Walter, There is not an Hood Adapter that will make the hood vent 7" to 8" that i'm aware of. You can contact RayPak at 805-278-5300 to see if they have such an adapter.
 Reply


?     Asked on 1/21/2015 by Ed

I presently have a 7" in-door draft hood. Heater model R206A calls for a 6" flue diameter. Can my existing 7" draft hood be used with the R206A?
 Reply

A  Answered on 1/22/2015 by InyoPools Product Specialist Alex V.

Ed, If you have the Raypak 206A heater, you will need the matching In-door stack top. You would not be able to use your existing one.
 Reply


Top
Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Socket Set, Wrench Set

Stack for old heater would not work.

Written on 3/6/2022 by Guest

The new stack matched up and we're back up and running.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)