Part # 2804-33
Manufacturer Code GLX-CELLSTAND
Dimensions 6-3/8" X 2-1/2"
Salt Cell Cleaning Stand for AquaRite® Turbo Cells and PureLine® Crystal Pure
Model #: PL7110
Keeping your pool’s salt chlorine generator in top condition is essential for clear water and consistent sanitation. The PureLine® Salt Cell Cleaning Stand is designed to make this task easier, safer, and more effective than traditional methods. Instead of awkwardly balancing a cell in a bucket of acid, this stand threads directly onto your cell, creating a stable, upright cleaning position. The result is a fast, mess-free way to remove calcium and scale buildup that can reduce chlorine output and shorten the life of your equipment.
Why Use a Cleaning Stand?
Salt cells naturally accumulate calcium deposits over time, especially in areas with hard water. If left untreated, this buildup restricts water flow, reduces chlorine production, and may cause system errors or shutdowns. Traditional cleaning often involves submerging the cell in a bucket of muriatic acid—a method that can be messy, wasteful, and unsafe.
The PureLine® Cleaning Stand provides a better alternative. By securing the cell upright, you can use less acid, reduce direct handling, and protect surrounding surfaces from accidental splashes. This simple tool not only makes maintenance easier but also extends the life of your investment.
Key Benefits
Quick & Easy Cleaning
Thread-on design allows you to attach your cell directly to the stand in seconds.
Eliminates the need for balancing or makeshift setups.
Cleaning process is faster, safer, and more consistent.
Extends Cell Life
Regular cleaning every 2–3 months helps prevent scale buildup on the plates.
Keeping plates free of deposits maintains chlorine output and reduces stress on your system.
By minimizing damage from acid overexposure, you protect the long-term efficiency of your cell.
Reduces Downtime
Prevents unexpected system shutdowns caused by clogged or scaled cells.
Ensures uninterrupted chlorine generation during peak swim season.
Durable Construction
Built from sturdy, chemical-resistant materials.
Designed to withstand repeated exposure to cleaning solutions and outdoor storage.
Provides long-term reliability for repeated use.
Compatibility
The PureLine® Salt Cell Cleaning Stand is compatible with many popular salt chlorine generator systems, including:
Hayward® AquaRite® and AquaTrol®
Goldline® Turbo Cells
PureLine® Crystal Pure
It is designed to fit the following part numbers:
T-CELL-3 / T-CELL-5 / T-CELL-9 / T-CELL-15
GLX-CELL-3 / GLX-CELL-5 / GLX-CELL-9 / GLX-CELL-15
How to Use
Rinse your salt cell with fresh water.
Thread the cleaning stand securely onto the cell.
Pour a diluted muriatic acid solution into the stand until the plates are submerged.
Allow the solution to dissolve the calcium buildup.
Rinse thoroughly before reinstalling the cell.
Disclaimer
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only. This product is not manufactured by Hayward®, Goldline®, or any referenced brands, nor is it endorsed or authorized by them. PureLine® is an independent aftermarket manufacturer.
How does this clean salt cell? Do You pour acid into the stand?
Thanks
Reply
Hello Mary - That is correct, in a way. You would screw the cell onto the stand. You would then pour a mixture of water and acid. A ratio of 3 parts water and 1 part acid is the best to start. You would then let site for about 10 - 15 minutes, pour out the mixture and unscrew and spray out with a garden hose. If you click HERE , you can see a video detailing the process.
Reply
Turbocell cap stand works great however, when I remove the Turbocell for cleaning, my pool drains from the return pipe and there is no shutoff valve on this end of the return system. Is there a threaded plug I can purchase to stop the pool from backflushing while cleaning my turbocell? If so, please advise where I can get one.
Reply
Hi, Steve. You can purchase the Turbo Cell Placeholder - GLX-CELL-PIPE to resolve the issue that you're having when cleaning the cell.
Reply
This is totally embarrassing. After cleaning my cell, I can't remember which way to hook it back up. It would be nice if it had an arrow for the direction of the flow. Once you tell me, then I will draw an arrow on with a Sharpie. Just tell me if the cord is on the right as the water flows right to left? Thanks.
Reply
Hi, Marilyn. The Turbo Cell can be installed in either direction.
Reply
Less than 1 hr
removed the cell ujoint couplings by hand
4 1
Less than 1 hr
Optional if needed; large adjustable pliers to loosen the clamps that hold the salt generator module
5 1
Salt pools, while they feel a lot nicer; the salt generator needs maintenance (like most of the pool equipment).
The salt cell breaks down salt, separating the chloride from the sodium, and converting the chloride into a form of chlorine that will keep the pool clean (similar to how chlorine tablets do).
The problem is... this electrical process causes deposits of minerals on the salt generator. The solution is to clean the salt generator, once or twice a year, depending on how long your swim season goes.
Cleaning is simple:
*Turn off the pump and salt generator power (better at the circuit breaker)
*Turn off the power switch in the salt generator panel and remove the salt generator module wire from the salt generator panel.
*Remove the salt generator module and replace it with the dummy tube... the reason to do this is both to keep the pool water from running out and to keep the pump primed.
*Attach the salt generator module to the stand, screwing it on, with the wire at the up end.
*I prefer to use vinegar mixed with water: one to one, put the vinegar in a container and add the water.
*Pour this solution into the salt generator and let it soak for 15-20 minutes
*Rinse out the salt generator thoroughly and inspect (look inside) to see if the plates are clean. If not, repeat the soaking procedure
*When the generator module is clean, remove it from the stand
*Remove the dummy pipe and re-install the generator, connecting the wire to the salt generator panel.
*Visually check for any things that look different than when you took it apart... it is good to take a cell pic before you start, then compare it after you re-assemble.
*Turn the power back on at the breaker, leave the power switch at the salt generator panel off.
*Start the pump and let it clear the pump of air... then let the air out of the top of your filter.
*Turn the salt generator panel switch on and let it run for a day
*Test salt content in the pool and adjust the generator output.
There you go, your salt generator is now cleaned and ready to keep your pool water feeling silky and keep the water clean!
Regular cleaning will extend the life of the salt generator module, so keep it clean!
THX for reading, now enjoy your pool!
Less than 1 hr
None
4 0
Less than 1 hr
None
3 0
The Most Recent Reviews
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Easier to clean the cell than a bucket, less acid used, saves money
Was this review helpful to you?
6 0
(1 out of 5 stars) Way overpriced! 50% cheaper on Amazon.
Reviewed By: Inyo Customer ()
$50 plus shipping for a plastic stand are you kidding me? This same one (and others) only cost $17 - $25 on Amazon. Get real guys. I like you and bought my salt generator and other equipment from you, but pricing this at over $50 plus shipping, this is highway robbery.
Was this review helpful to you?
3 0
(5 out of 5 stars) Makes Life Easier
Reviewed By: Inyo Customer ()
This piece makes life easier to clean the cell
Was this review helpful to you?
3 0
(4 out of 5 stars) Excellent delivery time and works well
Reviewed By: Inyo Customer ()
Excellent delivery time and works well.
Was this review helpful to you?
4 0
(5 out of 5 stars) Expensive chunk of plastic
Reviewed By: Inyo Customer ()
Expensive chunk of plastic
Was this review helpful to you?
3 0
(5 out of 5 stars) Dry fitted to test with Water and works great
Reviewed By: Inyo Customer ()
Ordered with my salt system, so I have not had to use just yet. Dry fitted to test with Water and works great. Now to put into storage, where I will probably forget about it in a year or so, then have to order one again. However, I believe with my PL7700, there is a reverse charge that cleans the coils.
Was this review helpful to you?
3 2
(4 out of 5 stars)
Reviewed By: Inyo Customer ()
functional
Was this review helpful to you?
4 0
(5 out of 5 stars) Safely Keep Your Chlorine Generator Clean and Efficient!
Reviewed By: Inyo Customer ()
Challenging to deal with muriatic acid as a cleaner for the salt water generator, no fuss no muss, just combine the correct 4:1 ratio of water to acid and soak for 15 minutes.
Was this review helpful to you?
1 1
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Haven't had a chance to use it and hopefully it will be a long time before I have to, but it makes complete sense over a bucket full of chemicals!
Was this review helpful to you?
1 0
(5 out of 5 stars) What I have been hoping for
Reviewed By: Mark S. from Rome GA ()
Excellent product and easy to find on the Inyopools web site I had been rigging up a makeshift rig and this works so much better and cleaner
Was this review helpful to you?
1 0
(4 out of 5 stars) Great Chlorine Generator Cleaning Tool
Reviewed By: Gary K. from Indianpolis, IN ()
Pros: Easy use and stable base
Cons: None
I borrowed the previous version of this device from a co-worker that also had a salt pool. The base of his was narrow and required being placed in a bucket because they tend to tip over. This model's base is wider and seems much more sturdy. Great and worth the $$.
Was this review helpful to you?
2 0
(4 out of 5 stars) Turbo Cell Stand
Reviewed By: Reiner from Allen, TX ()
Stand arrived quickly. Looks different from picture, but should work well. The o-ring to seal it up has to be placed in the holder each time it is used. Hope it doesn't get lost when storing the unit in between uses.
Was this review helpful to you?
2 1
(4 out of 5 stars) T-Cell Cleaning Stand
Reviewed By: Steven L. ()
Worked perfect, somewhat expensive
Was this review helpful to you?
8 1
(4 out of 5 stars) T Cell Cleaning Stand
Reviewed By: Felix the Cat from Modesto, Calif ()
Pros: easy to use, just screw on
Cons: No Con so far
I use to submerg my T Cell in a bucket of water and acid solution and let it stand for an hour. Now all I do is screw the stand on and pour in several cups of concentrated acid solution and let it set for 15-20 minutes and it's ready to go by on, cleaned!
Was this review helpful to you?