Part # 5020-141
Manufacturer Code R0445303
Alternate Part #'s R0445303, 35-295-1145, 445303, TLD-101-2002
IMPELLER, 1 HP FULL, 1-1/2 HP UPRATE
Replaced by Impeller 1.5 THP w/Screw, Backplate O-Ring - R0807202 http://www.inyopools.com/Products/02600019086577.htm
From the picture on line it looks as if the impeller and diffuser are a kit with the o-rings. Am I correct on my assumption?
The 5020-141 is the impeller only. The diffuser and seals would need to be ordered separately.
your jandy part number RO445303 looks as though it inclues both diffuser and impeller plus seals. (see side pics on your web site) Is this so?
Yes this is correct this item is now including both diffuser and impeller plus seals.
I purchased the impeller for jandy stealth 1.0hp the one you recommended but when received its different from what is on my pump old impeller has a shaft to put bearing, new does not do i install without bearing for shaft?
Hi, Victor. You will still need to install both parts of the pump shaft seal. Instead of slide the seal on to the impeller shaft, you will slide it onto the motor shaft then screw on the impeller.
(5 out of 5 stars) Jandy pump repair & motor replacement
Reviewed By: Thom from Florida ()
Pros: Quality, price, delivery & tech advice.
This part was a perfect match. It was better quality than the existing part I replaced. I purchased this as a kit with the diffuser. It came with the o-rings & diffuser screws that are required for this repair. The kit made it so simple. I also purchased a o-ring for the motor plate to insure a leak free assembly.
(5 out of 5 stars) Pump repair parts
Reviewed By: Michael L. ()
Pros: Great site and good prices.
The parts were just what I needed to repair my pump. The difference between this site and others was that I wasn't sure what I needed. Only Inyopools made it understandable as to what I needed and pointed me in the way of a kit that had everything I needed and cost me much less than if I bought the parts separately.