1. Home
  2. 2806-100

Details

Top

Part # 2806-100

Manufacturer Code CL01

Alternate Part #'s CL01, SMCL01

Product Description

The ChlorEase Salt Chlorine Generator uses salt to create chlorine and sanitize above ground pools up to 18,000 gallons. 

  • Easily attaches under the top rail
  • Plugs into 110 volt GFCI outlet
  • Generates chlorine without irritating chloramines
  • Reduces chlorine odor
  • Reduces irritation of eyes, skin & hair
  • Softens water for silky feel
  • No need to handle chlorine tablets, granules or liquid
  • Add initial dose of salt one time
  • Minimal additional salt required for maintenance
  • For pools up to 18,000 gallons (larger pools can use 2 units)
  • ETL Listed to UL 1081

Please note: this system is for above ground steel wall pools only.  It is not for use with soft-sided pools.

Click here for more Salt Water Pool Systems

Top
Ask A Question

?     Asked on 11/28/2014by Inyo Visitor

will this work for a hot tub?
 Reply

A  Answered on 12/2/2014 by InyoPools Product Specialist Robert M.

No, the manufacturer advised us that the CL01 cannot be used in a hot tub. We do not currently offer a salt system for a hot tub.
 Reply


?     Asked on 7/7/2015by Greg

It seems that my chlorinator turns off or does not remain with the green light on during the time it is running, is there any thing you might suggest?
 Reply

A  Answered on 7/10/2015 by InyoPools Product Specialist Lennox H.

Hi Greg, If there is "No Lights" on  Chlorease Saltwater Chlorinator (CL01) that's an indicator that the salt level is high and the system will shut off. I would recommend getting the water tested to find out what's the salt level in the pool and go from there. You can find information in the Chlorease Instruction Manual.
 Reply


?     Asked on 6/17/2016by bonnie granger

bought chlorinator last year, and now it wont work, why?
 Reply

A  Answered on 6/19/2016 by InyoPools Product Specialist Alex V.

Bonnie, Unplug the unit and verify that you have power at the socket. Use a voltmeter to determine that you have 115vac output from the socket. If a voltmeter is not available, use a lamp or other appliance to verify that there is enough voltage being supplied to the socket. If there is no supply voltage, either repair the socket or plug the ChlorEase in elsewhere. If the socket is active, call 1-561-805-7778 for service.
 Reply


?     Asked on 5/6/2017by Randy

Why is this system not compatible with the soft sided pools? What will happen if try it out on my intex 24' x 12'?
 Reply

A  Answered on 5/6/2017 by InyoPools Product Specialist Lennox H.

Hi, Randy. Due to the installation requirements, this system can not be installed on a soft side pool.
 Reply