By Zodiac



Part # 3230-66

Manufacturer Code X73010

Dimensions 4" L x 1.75" W x 1.75" D

Alternate Part #'s X73010, 87-130-1605, BAR-201-5102, ZODX73010

Product Description

Your Source for Swimming Pool & Spa Parts - INYOpools.com


?     Asked on 7/2/2020by Steven J Rowe

Zodiac T3 When installing T3 Diaphragm, Should it be assemled with out any type of lube or sealer? T# Diaphragm Part # 323066 Mfg Code

A  Answered on 11/20/2020 by InyoPools Product Specialist Hector F.

Hi Steven, you will not need any lubricant or sealant for installing this diaphragm. 

?     Asked on 12/6/2016by bill Perry

will this fit G2

A  Answered on 12/6/2016 by InyoPools Product Specialist Lennox H.

Hi, Bill. Unfortunately, this diaphragm will not fit the Barracuda G2 cleaner. The Diaphragm (W81701) is the correct one.

?     Asked on 11/9/2016by larry

my zodiac barracuda pool cleaner does not climb the walls. It starts to than falls off and keeps doing it in the same area. It also goes backward a lot. I just replaced the diaphragm. Could it be the suction? or what else?

A  Answered on 11/10/2016 by InyoPools Product Specialist Scott W.

If you just replaced the diaphragm then the only other thing you could do is to adjust the suction.

?     Asked on 7/24/2016by bob avila

how is the diaphram taken out of the tube?

A  Answered on 7/25/2016 by InyoPools Product Specialist Alan M.

Hello, Here is a great video on How To Replace the Zodiac X7 Diaphragm. The steps are quite similar if you have the T3 cleaner.

?     Asked on 10/13/2015by sheila kilby

Does this part work with the Zodiac T5 Duo? Thank your

A  Answered on 10/14/2015 by InyoPools Product Specialist Lennox H.

Hi Sheila, The TT Diaphragm, X7 Quattro (X73010) can be used with the Zodiac T5 Duo Cleaner.

?     Asked on 1/23/2013by Guest

Do instructions come with the diaphragm?

A  Answered on 1/23/2013 by InyoPools Product Specialist Patrick P.

Instructions do not come with the diaphragm. If you need instructions, you can find them here.


Est. Repair Time

Less than 1 hr

Tools Needed


2     0

My X7 would not move at bottom of pool to pick up debris

Written on 1/13/2017 by imau

Removed old diaphragm which had a hole and replaced with new one. My Cleaner now works as good as new!

Were these instructions helpful? 


Review Summary

 (Average 4.38  out of 5 stars)
8 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews