Clear Snap On Lens (FLEDLCFG)



Part # 3594-024

By S.R. Smith

  5 Average  



Part # 3594-024

Manufacturer Code FLEDLCFG

Dimensions 3.25" L x 3.25" W x 1" D

Alternate Part #'s FPAL-LC, FPALLC, 57-330-1210, FSFLEDLCFG

Product Description

PAL-2000 Light Lens Accessories

Snap On Blue Lens
Snap On Green Lens
Snap On Red Lens
Snap On Orange Lens
Spare Snap On Clear Lens
Coloured Lens Set

Product Specifications

Used On:

?     Asked on 7/5/2019 by Victor Wilfore

Ordered 6 caps and no screws were included?

A  Answered on 7/17/2019 by InyoPools Product Specialist Aidan F.

Hi Victor, these lenses are snap-ons, so no screws are necessary to install them to your fixture.

?     Asked on 10/6/2015 by Steve

Do I need a gasket with this lens, it appears there was one installed on the original installer lens. Does the replacement lens come with a gasket, if not what is the part number.

A  Answered on 10/8/2015 by InyoPools Product Specialist Lennox H.

Hi Steve, It does not appear that the Clear Snap On Lens (PAL-2000) (FPAL-LC) requires a gasket.

?     Asked on 9/23/2015 by Lina

What nylon screw part number do I need to go with the Pal-2000.

A  Answered on 10/1/2015 by InyoPools Product Specialist Lennox H.

Hi Lina, The Cover Screw,PAL-2000RU (39-P100-69) would be the screw needed for the Clear Snap On Lens.

?     Asked on 5/18/2015 by Dean

I have the same question that leon had, I have two cracked lens covers and they don't have the tab on the side will the one with the tab fit on my lenses.

A  Answered on 5/27/2015 by InyoPools Product Specialist Patrick P.

Hi Dean, It sounds like you have one of the Original Treo Lights the part # on those lights started with the prefix of FPAL. The Original Treo Lights did use a Lens with no tab and we carry the Original Treo Lens with No Tab here.

?     Asked on 4/8/2015 by Leon

I have color change LED lights in my pool with PAL 2000 clear covers. One has broken so I need a replacement cover. Your replacement cover, shows a small tab on the side of the cover that I do not have on my lenses. Is this a 'snap off' tab that is optional or do I need to order one without any tab? I do not see one available without the tab.

A  Answered on 4/9/2015 by InyoPools Product Specialist Bob D.

Hi Leon, No this is not a snap off tab and would not work with your light. It sounds like you have one of The Original Treo Lights which did not have a tab on the lens. We do carry the Original Treo Lens with No Tab here.


Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Phillips head screwdriver

The lens had cracked only Inyo Pools had the replacement

Written on 8/13/2020 by Guest

1. unscrew the lens from the pool only one screw
2. using the same screw install the new lens from Inyo pools. No need to lower the pool level
3. Enjoy your new pool light lens

Were these instructions helpful? 


Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews