$29.76

Qty:

By Custom Molded Products


Details

Top

Part # 5500-031

Manufacturer Code 25562-000-000

Dimensions 18" L x 3.5" W x 1.25" D

Alternate Part #'s 25562-000-000, 25562000000, LTDF-101, 62-605-1000, CMP25562-000-000, CMP25562000000, SPG-351-1000

Product Description

This is a plastic swimming pool ladder tread which replaces a number of ladder treads, including SR Smith and Swan. 

This is made of heavy duty plastic with a cross brace pattern built into the lower side. Each end has a 7/16" hole for use with standard 3/8" diameter ladder bolts.

Dimensions and Specifications:

  • Material: Heavy duty plastic
  • Inside Length: 17-1/4"
  • Outside Length: 18-1/4"
  • Width: 3-7/16"
  • Height: 1-3/8"
Top

?     Asked on 7/21/2015by solomon

how many pounds can the swan 18' step hold
 Reply

A  Answered on 7/27/2015 by InyoPools Product Specialist Lennox H.

Hi Solomon, With the Plastic Ladder Tread, Swan Replacement (25562-000-000) attached to the ladder frame, it can support up to 400 lbs according to the manufacture.
 Reply


?     Asked on 8/15/2015by nick

need bolts to attach step
 Reply

A  Answered on 8/16/2015 by InyoPools Product Specialist Lennox H.

Hi Nick, The Ladder Step Bolt & Nut S.S.(Qty 1) can be used with the Plastic Ladder Tread, Swan Replacement.
 Reply


?     Asked on 6/2/2016by Gayle

Is this a 19 inch ladder step?
 Reply

A  Answered on 6/2/2016 by InyoPools Product Specialist Patrick P.

Hi Gayle, This ladder tread measures 18" wide.
 Reply


?     Asked on 8/1/2016by Stacey

If I am trying to measure what size step I need, do I measure from the very outside edge of the step or the inside curved part?
 Reply

A  Answered on 8/10/2016 by InyoPools Product Specialist Alan M.

Hello, You would measure the step edge to edge.
 Reply


?     Asked on 8/7/2016by Mikhail Akselrod

I need a bolts and nuts to install Plastic Ladder Tread, Swan Replacement. Could you advise where I can buy it? Thanks, Michael
 Reply

A  Answered on 8/19/2016 by InyoPools Product Specialist Stacey M.

Hello Mikhail, to find Ladder bolts with nuts please click here to see parts depending on length.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Socket Set

Broken Ladder Step

Written on 8/31/2023 by Guest

We have a 40 year old pool and the ladder steps were breaking one after another. I was unsure of the name brand of the old steps but was finally able to make out the Swan logo. Excited to find this company when searching and that they carried the Swan steps but the size/fit was another question. We made many measurements and ordered. The step fit perfectly! Thanks to Inyo Pools!!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Socket Set

Pool ladder steps were broken

Written on 6/28/2021 by Guest

- Use a socket wrench to loosen the bolts and then remove the existing broken step pieces that were still attached to the ladder
- Put the new step into place and push the bolt through the step mounting hole and attach the nut
- Tighten the nut

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Pliers, Socket Set

A step on my Inground pool ladder broke. I had previously replaced another step in 2017

Written on 7/31/2019 by Guest

Removed ladder from pool and replaced step with existing bolts from broken step.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.86  out of 5 stars)
7 Rating
5 star:
 
(6)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews