By AquaVac



Model # RC9742WC

Warranty 2 Year Warranty

Manufacturer Code W3RC9742WCCUBY

Alternate Part #'s RC9742WC

Product Description

SharkVAC XL cleans pool floor and walls with computer efficiency. Its sleek, low-profile design and easy top-access allows quick debris removal and easy cleanup.

SharkVAC XL calculates the size of pools and programs itself for the most time and energy-efficient cleaning path - cleaning floors and walls as it goes. It uses up to 94% less energy than most pressure cleaners  comparable to the energy used by a standard light bulb.

2016 $50 visa gift card Crystal Clear Savings on Suction Pool Cleaner Rebate (Can not be combined with any other discounts)


  • Cleans floor and walls
  • Easy top access - no turning the cleaner over to empty
  • 2 fine porosity filter elements - just remove and rinse with garden hose
  • 3-hours cleaning cycle
  • Calculates pool size and programfs itself for the most time and energy - efficient cleaning path
  • Saves you money - uses up to 94% less energy than most pressure cleaners
  • Runs separately frompool's pump and filter system
  • Cleans all residential pool surfaces, gunite,vinyl or fiberglass up to 20 x 40 ft
  • Out-of-water sensor protects motor by not allowing it to run while out of the water
  • Beach entry sensor detects when it's climbing out of the water and reverses direction
  • 2-year warranty

?     Asked on 11/7/2014by Sonya

How to replace the soft trac on this cleaner?

A  Answered on 11/11/2014 by InyoPools Product Specialist Brian M.

Good morning. I wish I could say I had a step by step instruction book for this. I called Hayward and they gave me a quick rundown. FIrst you need to remove the cartridges and holder from the inside. Now, there will be screws on the inside that are holding the outside panels on. Once those panels are off, you can take the belts off and the soft tracks should easily replace the existing scrubbers. If you have any issues, may I suggest giving Hayward Technical a call at 908-355-7995.

?     Asked on 8/4/2017by April

This pool clean advertises that is cleans in ground pools up to 20'x40' in size. But I have a 20'x50' in ground vinyl lined pool. Does this mean this cleaner is not equipped to handle anything bigger than 20'x40' in size? Or would it just take longer then the advertised 2-3 hours normal time to clean?

A  Answered on 8/5/2017 by InyoPools Product Specialist Alex V.

April, There would be 2 main issues if you used this cleaner. The fist would be that the cleaner would not have enough time to clean your pool as these cleaners run on a timed cleaning cycle. The second issue would be the length of the cord. Depending on where your electrical outlet is located, you may not have enough cord length for the cleaner to reach the entire pool.  


Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
4 star:
3 star:
2 star:
1 star: