Long Life Baracuda Pool Cleaner Diaphragm - Generic - 25563-810-000



Part # PL1842

By PureLine

  4.68 Average  



Part # PL1842

Manufacturer Code 25563-810-000

Dimensions 5.75" L x 1.7" W x 1.7" D

Alternate Part #'s 25563-810-000, PL1842, W69698, 87-605-1080, CTM-251-1122, PTMP180523

Product Description

Manufactured by PureLine, the Long Life Diaphragm is a generic replacement for the Baracuda / Zodiac brand diaphragm W69698.   Used in the Baracuda / Zodiac G3, G4, Zoom and CMP CleanPro S-2000 cleaners.


?     Asked on 8/17/2020 by Doug

Will this part fit vingli pool cleaner pl1842

A  Answered on 8/17/2020 by InyoPools Product Specialist Lennox H.

Hi, Doug. Yes, it will. 

?     Asked on 7/31/2020 by WANDA J WEINER

How do I get the ring on the Diaphragm?

A  Answered on 10/29/2020 by InyoPools Product Specialist Joe S.

Hello Wanda, you would need to order the Diaphragm Retaining Ring - W81600.

?     Asked on 3/25/2020 by Jon

I have a Vingli pool vacuum. I want to find a the diaphragm that fits this device. The typical Zodiac one does not fit. The inside diameter of diaphragm is a little larger. The Zodiac's don't fit because of an edge inside where pipe end is. What is a good part number for the replacement Vingli diaphragm.

A  Answered on 4/1/2020 by InyoPools Product Specialist Lennox H.

Hi, Jon. Unfortunately, we do not carry replacement parts for Vingli pool cleaners. 

?     Asked on 10/17/2019 by Josh

I have a Vingli pool cleaner that I bought on Amazon. Will this diaphragm be compatible?


A  Answered on 10/17/2019 by InyoPools Product Specialist Steve M.

Josh, we apologize for the inconvenience, however, we do not sell Vingli products and have never held their products in our inventory. We are unable to confirm that the Long Life Diaphragm - Generic - 25563-810-000 would be a direct fit, however, based on your photo it sure looks to be correct.

?     Asked on 5/7/2019 by JOHN J


A  Answered on 5/8/2019 by InyoPools Product Specialist Lennox H.

Hi, John J. Unfortunately, we're unable to confirm if this Diagram will work with the Jacuzzi J-D300.

?     Asked on 11/5/2018 by Esteban

Hello there would this part fit a clean pro s2000?

A  Answered on 11/5/2018 by InyoPools Product Specialist Lennox H.

Hi, Esteban. Yes, this Diaphragm is also compatible with the S2000 pool cleaner. 

?     Asked on 9/17/2016 by

does my $5.00 reward code work for this order ?

A  Answered on 9/19/2016 by InyoPools Product Specialist Stacey M.

Hello, Yes the part has to be over $25 to use your $5 off code.

?     Asked on 10/24/2014 by Rick

Hello I have a question regarding a replacement diaphragm I purchased. It is an aftermarket part that's described as "heavy duty". The part seems to feel a little thick and a little bit stiff. Will this require more suction to make it operate?

A  Answered on 10/26/2014 by InyoPools Product Specialist Patrick P.

Hi Rick - We have not experienced that this after market Baracuda diaphragm has required any additional suction from the cleaner. We have found that the after market diaphragm seems to last a little longer then the original OEM diaphragm by Baracuda.

?     Asked on 7/26/2014 by Guest

Does this work on the Baracuda alpha 2?

A  Answered on 7/26/2014 by InyoPools Product Specialist Patrick P.

No this does not work on the Alpha2 pool cleaner. Here is the correct diaphragm for the Alpha 2

?     Asked on 7/10/2014 by Guest

I have a Baracuda G3 and the cleaner starts and stops, will replacing the Diaphragm fix this?

A  Answered on 7/10/2014 by InyoPools Product Specialist Patrick P.

The most common part which goes out on the G3 would be the diaphragm this causes the cleaner to start and stop or completely stop moving. Take a look at your Diaphragm and if you see any tears or rips then the replacement of your Diaphragm should fix the problem


Review Summary

 (Average 4.68  out of 5 stars)
28 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews