Part # 25933-154-000
Manufacturer Code 25933-151-000
CMP Pool & Spa 3-Way Diverter Valve
Part No. 25933-151-000 | 1-1/2" Inside, 2" Outside Slip
✅ Features & Benefits
✅ Genuine CMP 3-way diverter valve for pools & spas
✅ 1-1/2" slip (inside) and 2" spigot (outside) plumbing connections
✅ Smooth diverter action allows precise flow control between lines
✅ Heavy-duty construction built for long-term outdoor use
✅ Easy-to-service design with removable handle and internal components
➡️ Flexible Flow Control for Pools & Spas
➡️ Direct water where it’s needed — the CMP 25933-151-000 3-way diverter valve makes it simple to balance flow between multiple pool or spa features.
⚠️ Tech Tips & Cautions
⚠️ Always verify plumbing size before ordering (1-1/2" slip / 2" spigot)
⚠️ Use silicone-based lubricant on valve seals during installation
⚠️ Do not overtighten connections — hand-tightening is sufficient
⚠️ Periodically check diverter seals for wear; replace if leaking or stiff to operate
The picture of this valve looks to be a 2 way not a 3 way. Or does the third outlet come in from the bottom.
Reply
I have verified that the product photo was incorrect and it is a three way valve. I have updated the photo to reflect the correct representation. Thank you for allowing us to correct that error.
Reply
is this a 3 way valve? Picture shows a 2 way.
Reply
Hello, Yes, this is a 3 way valve.
Reply
is this valve pvc or cpvc? what cement should be used to cement this valve to schedule 40 pvc?
Reply
Hi Nick, this valve is CPVC and you can use standard PVC cement or wet/ dry PVC glue.
Reply
is this valve repairable?
Reply
Hello Daniel. Custom Molded Products (CMP) Gray PVC 3-Way Valves are repairable. CMP makes available a full inventory of replacement parts for these valves.
Reply
