By Speck Pumps


Details

Top

Part # 2088301020

Warranty 2 Year

Manufacturer Code WF104-1050F-0FS

Alternate Part #'s 2088301020, 21-80/30G, WF104-1050F-0FS

Product Description

Shaft Seal 

Impeller 

Flange 

Seal Housing 

Special Water Feature Pump

The Speck Model 21-80/30 G is a high efficiency plastic Special Water Feature Pump. The Model 21-80/30 G is ideally suited for pools with a vanishing edge, waterfall, fountain or waterslide applications. The flooded suction pump design provides maximum flow at low head and is extremely quiet due to a large 4” suction and discharge and low RPM motor (1750 RPM).

Features:

  • This high volume, low head pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour.
  • The pump can be used for pool water with a salt concentration of up to 5000 ppm.
  • Pump parts are made of 100% recyclable plastic. Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F.
  • All pumps are equipped with 4” quick disconnect unions.
  • For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between pool water and electric parts.
  • Heavy duty “1081” E-plus®/extreme-E™ energy efficient pool motor with large 56 frame motor is thermally protected, has a PSC switchless design and extra large sealed ball bearings.
  • Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout.
  • Two year warranty on the motor and all pump parts, including normal wear of the mechanical seal.
  • Every pump is performance tested before leaving the Speck factory.

The Model 21-80/30 BS is not self-priming.

Product Specifications

HP:
1/2 HP
Volts:
115/230 V
Max Pool Size:
4 gal.
Union Connectors:
Included
Weight:
52 lbs.
Service Factor:
1.8
Port Size:
4 in.
Speed:
Single
Top

?     Asked on 5/12/2018by Steven Beyer

Can I buy a electric motor for my Speck 21-80/30 pump.?
 Reply

A  Answered on 5/15/2018 by InyoPools Product Specialist Lennox H.

Hi, Steven. You can replace the Motor Only - 0818488300, or the Motor Unit - 2088300005M
 Reply


?     Asked on 5/21/2020by Tom

my pump has become unprimed. How do I prime it? I have tried filling it with water but it never fills up and it wont prime.
 Reply

A  Answered on 5/22/2020 by InyoPools Product Specialist Hector F.

Here are two guides that we created called "How To Prime a Pool Pump" and "How To Determine Why a Pool Pump Won't Prime" that may assist you in both troubleshooting and resolving that issue. 
 Reply