By Cinderella Inc.



Model # CPHM2C2040

Product Description



  • Quality Extruded Aluminum
  • Horizontal Mount Coping With Liner Track and Alignment Edge
  • Longer Alignment Lip
  • Electrostatically Painted
  • Textured Powder Coat Finish
  • Custom Colors Available - 5 - 10 Day Lead Time
  • Custom Bending & Welding - 3 - 5 Day Lead Time

Technical Specs:

  • HM-2 Horizontal Mount Coping With Liner Track and Alignment Edge
  • .35" Top of coping to Mounting Surface
  • 1.825" Mounting Surface Width
  • Textured Powder Coat Finish

Product Specifications

8 ft.

?     Asked on 5/6/2013by Guest

We need to replace our coping and we will be adding brick pavers to our deck? Is model number CPHM2C2040 the correct style of coping?

A  Answered on 5/6/2013 by InyoPools Product Specialist Patrick P.

Yes, the Cinderella CPHM2C2040 is the correct coping for brick pavers.

?     Asked on 8/24/2015by Chad

Is this coping white?

A  Answered on 8/24/2015 by InyoPools Product Specialist Bob D.

Hi Chad. The HM2 has a white powder coat finish. For a more complete look at the other styles follow this link.

?     Asked on 1/12/2019by Robert Prillwitz

does the track screw into the pool wall? what would be the distance between screws? is a corner track required? We have a 20x40 pool with a worn out vinyl track which is pulling away from the pool wall.....would like to replace track,padding and liner this spring......RP

A  Answered on 1/16/2019 by InyoPools Product Specialist Lennox H.

Hi, Robert. The track is mounted to the pool wall. The screw spacing will vary, but usually 6-12" inches apart. 

?     Asked on 10/7/2021by Frank

I’m replacing my vinyl pool coping with pavers. I have a Grecian style pool. Do these section bend to accommodate slight curves ?

A  Answered on 10/7/2021 by InyoPools Product Specialist Rich N.

Hi Frank.  You would need to get these HM2 Field-Bendable Liner Track pieces if you need curved pieces for your pool.  Use the CPHM209600N3 and CPHM2C2040N3 for 3' radius or larger and 4' reverse radius and larger.  Use the CPHM2NX48 for 2' to 3' radius and reverse radius bends.  Pre-made HM2 corners are available here; reverse radius corners are here and welded corners are here.


Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews