$16.07
Model # P31001DE
Spa Solutions pH Up
RAISES PH TO IDEAL LEVELS! Balanced water chemistry is the first, most important step to clean, sparkling water. pH levels below 7.2 ppm can cause eye irritation, rapid use of chlorine/bromine, and corrosion. Use Spa Up in appropriate dosages to raise the pH in your spa water to the ideal range of 7.2 to 7.6 ppm.
| Amount of pH Increaser needed to increase pH Pool Volume in gallons |
|||||||
| pH reading | 1,000 | 5,000 | 10,000 | 15,000 | 20,000 | 25,000 | 50,000 |
| 7.2-7.4 | 2/3 oz. | 3 oz. | 6 oz. | 9 oz. | 12 oz. | 1 lb. | 2 lbs. |
| 7.0-7.2 | 3/4 oz. | 4 oz. | 8 oz. | 12 oz. | 1 lb. | 1 1/4 lbs. | 2 1/2 lbs. |
| 6.6-7.0 | 1 1/4 oz. | 6 oz. | 12 oz. | 1 lb. | 1 1/2 lbs. | 2 lbs. | 4 lbs. |
| Under 6.7 | 1 1/2 oz. | 8 oz. | 1 lb. | 1 1/2 lbs. | 2 lbs. | 2 1/2 lbs. | 5 lbs. |
*Caution: Do not add more than 20 oz. per 10,000 gallons of water at one time. If the pool needs more than this, add the 20 oz. per 10,000 gallons amount then retest 4-6 hours later. After testing, you can make the necessary adjustments.
For More Spa Chemicals
The Most Recent Reviews
(5 out of 5 stars) works as advertised
Reviewed By: Joseph M. from Long Beach Township, NJ ()
Just a little gets the PH to the right level in my hot tub. Just mix with some water beforehand and put in while the just are running.
Was this review helpful to you?