Part # PL5819
Warranty 2 Year Warranty
REPLACEMENT COLOR CHANGING LED POOL & SPA LIGHTS
Pure Colors replacement LED pool & spa bulbs offer seven solid colors, and nine light shows that can instantly transform your pool area into a color-rich paradise. The Pure Colors bulb uses an Edison screw in base, so they install easily into your existing fixture in just minutes. Plus, LED technology makes them the most energy efficient and longest lasting bulb on the market. This version of the PureColors LED Bulb comes with a RF Remote Control meaning that your pool can be easily turned on by the hand held remote which is included with this bulb or by a standard light switch.
Will the PureColors Pool LED Bulb with RF Remote synchronize with the standard PureColors Light Switch Control Bulb? The PureColors RF Remote Control Bulb will not synchronize with the with the PureColors Light Switch Control LED Bulb as the inner control board of the two bulbs are different as well as the color show programs.
Will two RF Remote Bulbs Synchronize with each other? If you have two RF Remote bulbs they may not always synchronize. Because the lamps are installed underwater and the water will block the signal in various degrees, also since the bulbs are at different distances this can affect synchronizing. The remote will turn both lights on and off and set set the lights to a fixed color without a problem but the color shows may fall out of synchronization. Most likely your lights will also be hooked up to a light switch and if the lights are wired to the same switch then cycling through the color show with your light switch instead of the remote will ensure that the bulbs synchronize together in color changing mode.
If I have two PureColors LED Bulbs with RF Remote control, will one remote work on both bulbs? Yes one remote can be used for both bulbs. Remember you must have two RF remote bulbs as the RF remote will not turn on Non RF remote bulbs.
What do the 4 buttons on the remote control do? Button #1 is for cycling through the 7 fixed colors of the bulb. Button #2 is for cycling through the 5 color shows of the bulb. Button #3 is for adjusting the changing speed when the bulb is in color changing mode. Button #4 is to turn the bulb on & off.
Can you change the functions of the 4 buttons on the remote? No the functions on the remote control cannot be changed and they are pre-set.
Do these bulbs have memory? When turning the bulbs on and off with the RF remote control then the bulbs do not have memory, meaning that if you had your bulb set on blue and if you turn your bulb off for more than 15 seconds then the next time you turn the bulb on with the remote then the bulb will not turn back on in the color of blue. The bulbs do have memory when you turn them on and off using your light switch meaning that if you have your bulb set to green and you turn the bulb off using your light switch then the next time you turn your bulb on using the light switch then the bulb will be in the green mode.
What is the Range of Remote Control? The remote control distance is 330 Ft. in an open place. When indoors with walls and doors it will be shorter, about 75' to 150', depending on the block condition.
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
Will this light synchronize with the spa light by pureline , so they both will operate in the same mode or color using the remote , and I see 4 buttons on the remote , are they preset or can you change them
Hi Jeff, No the Remote control version of this bulb will not synchronize with multiple bulbs even if you get another remote control version of the bulb. If you would like to synchronize the bulbs you will need to get the "Switched" version of the bulbs, this means that the bulb(s) would be wired to a single standard light switch and you use the light switch to turn the bulbs on and off and cycle through color shows. When wiring the bulbs to the same switch then they do synchronize together, most pool lights & spa light are already set up to a switch so this just means replacing the bulb. Here is the Pureline Prime 12V Switched LED Pool Bulb and here is the Pureline Prime 12V Switched LED Spa Bulb.
Can the bulbs be programmed to return to single color (white, for example) each time they are powered up or do they default to multi-color each time? If not, do you have single color versions?
Hi Ross, If you get the PL5809 LED Bulb with Light Switch Controlled then it does have memory, meaning that if you have the light set on white and you turn the light off for more than 10 seconds then the next time you turn the light on it will remember to start on white. For the PL5819 if you turn this bulb on and off with the RF remote then it does remember the last setting the bulb was on but if you use the light switch to turn the bulb on and off then it does have memory when using the light switch. We do also have a PureColors LED White Light Only Bulb 120V Light Switch Controlled (No Remote).
how to tell which Hayward light I have
Hello, When you pull the light out from the pool niche, you will see a part/model number located on the back of the light. We can cross reference those on our website to see what type of light you have. If you are not sure how to do this we have a "how to" video.
Can you please tell me if the PL5819 pool bulb 120v 35w will fit a Jandy DuraNiche SP0607U. I would like to buy one of these for my pool which is only 3 years old but not sure if it will fit.
Thanks, Ed Haas
Hello Ed- The PL5819 is just a light bulb and the part number you provided, sp0607U, is for a hayward niche. Do you know the model of your light?
Less than 1 hr
Screwdriver, Adjustable Wrench
Unscrewed the lens retainer bolt from the new Pentair pool light fixture housing and removed the white light bulb, replacing same with the new multi-colored LED bulb. Replaced the glass lens to the light fixture housing and re-tightened the retainer bracket; replaced the entire new fixture with the new LED bulb into the pool light niche, tightened the retainer niche screw and fired up the new light with the supplied remote.
(3 out of 5 stars) Average
Reviewed By: Inyo Customer ()
Bulb works great! Easy to install and love the color display. Remote control, not so good. Initial remote worked one time then did not work. Changed the battery and still no luck. Received a replacement and while it works, it is very tempermental and only works intermittently for no particular reason. Without the remove, you lose five of the color displays and also the ability to adjust the speed of the light display.
(3 out of 5 stars)
Reviewed By: Inyo Customer ()
The remote has a wierd battery- Hope I can find a replacement when the time comes. Initially the remote didn't work because the contact spring was badly misshapen and i had to use tools to make it connect. The lite is fun with all the colors and lite show optios- hope it lasts.