$691.43
Part # PL2607
Warranty 12 Month Warranty
Maximize your savings with the new PureLine Prime Digital Dual Speed Pump.
The PureLine Prime Digital Dual Speed Pump utilizes Century’s 2Green motor, delivering premium energy efficiency and program flexibility with an integrated user interface. The PureLine Prime Digital Dual Speed Pump is an exact replacement to the Hayward® Super Pump, making it quick and cost efficient to replace.
The main benefit of a dual speed pump is that you can run your pump at a high horsepower (HP) or a low HP. The majority of the time your pool is operating you will run your pump at the low HP which saves you 58% over the high HP. If you need to run your cleaner, spa or your pool is getting a bit dirty then simply switch over to the high HP for some serious cleaning. Another great benefit to the PureLine Prime Dual Speed Pump is that it is the only pump on the market which has digital controller mounted directly on the motor, this means easy installation and simple programming. For most dual speed pumps additional controllers with complex wiring are required which can be very expensive, that is not the case with the PureLine Prime Digital Dual Speed Pump.
PureLine Prime Pump Application:
PureLine Prime Variable Speed Pump Benefits:
Pump Curve
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
wire on 230, how many amps does this draw at each speed
Reply
Hi Chuck, At the high speed the pump draws 6.3 amps and at the low speed it draws 2.3 amps.
Reply
Will this work for a 23000 gallon fiberglass pool with 1 1/2" pipe. Current set up is a Hayward S244T sand filter (thinking of upgrading to a cartridge filter) and a Pentair inline chlorinator. Current pump is a Hayward Super II Pump paired with a Emerson K63CXEPZ - 4767, 1.5 HP motor on 115V with Intermatic Timer. The only return is through the skimmer. The equipment is inside a third car garage. Really looking at saving some money on utilities.
Reply
Hi Steve, this would be a great pump for the set up you explained. The only issue I see is that you are set up for 115V and this pump is 230V only.
Reply
Is this a replacement for the Pinnacle Pentair 342351?
Reply
I am replacing a Hayward Super Pump with a single speed 1 hp motor. I do not have any time of timer controlling this pump. I just have an on off switch on the wall.
1. Do I need to add a timer to the PL2607?
2. Can I just turn the PL2607 off at the switch without a problem?
3. Can I leave power to the PL2607 on and will the controller turn it on and off as programmed?
Thank you.
Reply
Hi, Steve. A separate timer is not needed for this pump. Yes, you can turn the unit off or leave it on to allow the pump to follow the set on/off times.
Reply
I currently have a 1HP Hayward Maxi Flo II that I need to replace. Our pool is a Doughboy (13000 gal.) above ground that we have installed in the ground. The pump has to be self priming and run on 110 volts. Lift from skimmer is 4-5 ft. I'd like a pump that will match the plumbing for the Hayward. I wish I could get a variable speed since we have a salt water pool. Please give me your best recommendation. Thank you, Gary PS I'm already on your mailing list
Reply
Gary, The PL2607 runs on 230v. The only 2 speed pumps we have that are 115/120v are above ground pool pumps but they are not self priming.
Reply
