i have an above ground 8500 gal, i have to use a pump thats runs on 115v. I'm looking at hayward vs 115v .85 hp, whats the largest cartridge filter i can use
Reply
Hi Anthony, I would recommend the Hayward Star Clear Plus 120 Sq Ft. Filter 1.5" Ports (C1200).
Reply
Can i use Hayward Super Pump VS Variable Speed Pump (115V) with 15,000 gal in ground pool?
Reply
Hi Mike, Yes this would be a good option or I also like the PureLine Pure Flow Variable Speed but it is only wired 230V
Reply
hello! i'm looking for a replacement for my SP1750 (1/2HP) for an in-ground swim spa (3K ga). the pool has rooftop solar and we hope to add a vac-line when we replace the liner (= 50 feet of suction head + 15 ft of line to solar). currently, i'm using a 50sqft. cart-filter. if moving to this pump, would I need to upgrade to a 90-120sqft filter because of flow-rates the pump puts out? what other things should I consider in the equation?
Reply
I'm looking for a pool pump to run during the day with excess solar, and am concerned about the in-rush (current surge) when the pump starts, I'm looking at the SP23115VSP, I like the low wattage loads at low speeds, but need to start it up from a 2800 watt inverter. Will this pump work? What is the startup current?
Reply
Hi, Mike. This pump if prime at 3450 RPM will use 1200 watts. To find out if using an inverter to power this pump is okay I would recommend contacting Hayward at 908-355-7995.
Reply
I am looking ot go to a variable speed pump specifically the SP26115VSP but I have a Raypak R266A-EN-C heater that has a minimum flow of 25 and max of 125. Would this pump be okay on lower speeds.
Thanks
Reply
It will depend on your feet of head, so if you can provide the distance from your pump to your skimmers I can calculate what your flow rate will be at the different frequencies.
Reply
Looking to go to a variable speed pump. Currently have a Hayward SP3007EEAZ 3/4 HP. is this a direct replacement for that? Also have a Hayward Goldline AquaPlus and it is my understanding that this pump can be controlled by the relays in the AquaPlus?
Reply
This would not be a direct replacement as far the plumbing goes the plumbing ports or in a different location, so you will have some slight re-plumbing. This variable speed pump is 115V only so you have to make sure you are wanting to wire 115V, outside of that this would be a great replacement pump for your Hayward SP3007EEAZ being used with a GoldLine AquaPlus.
Reply
I have a Hayward Super pump SP2607X10 and was wondering if this would be a direct replacement for it. Thanks
Reply
Hi, Jeff. Yes, this Hayward Super Pump VS - SP26115VSP can be used to replace the Hayward Super Pump - SP2607X10 operating at 115 volts.
Reply
what size pump for a 18 x 36 inground pool? I think its right around 30000 gallons. My filter is rated for 52 gpm max. Not sure which variable speed pump to upgrade to.
Reply
Hi. To determine what size pump you need for your pool, check out Inyo's How to Size a Pool Pump for Your In-Ground Pool along with the How To Measure Total Dynamic Head With Gauges guides.
Reply
19,500 gal IG vinyl, 50 ft TDH, 44 GPM design flow rate Hayward S200 sand filter, 1.5" piping. What is the GPM at various speeds? This would be replacing a SP2607x10 1HP. Does this have enough power?
Reply
Hi. This Super Pump VS Variable Speed Pump - SP26115VSP with your TDH will generate a flow rate of 35 GPM at 3450 RPM. It will be sufficient for water circulation only.
Reply
i have a small in ground pool at 5,000 gal. i want to replace my current 1hp pump with Variable speed drive pump because of the low noise and energy savings. i viewed the video on line and calculated my GPM to be 10.41. my avg run of pipe is 16.6. can you assist in helping me determine the size of variable speed pump i would need.
thanks
Reply
Hello, What would be the voltage you are running on? Also, what is the size of your plumbing?
Reply
