I currently have a Hayward Max Flo Pump (self-priming), model SP 1607-2-1MXBK that has suddenly quit moving water. The motor runs but the water does not move. Is it possible that the impeller could have imploded or worn out?
Reply
Bill I would check if your impeller is clogged if it is not clogged then I would check if there are any visible signs of damage on the impeller, if so then the impeller would need to be replaced.
Reply
I have Hayward Model: SP2807X10 pump and need to know which tune-up kit to purchase to go with the motor replacement. I have motor Mod: 5KC39PN2822BX and also need to know the replacement motor to purchase,Thank you.
Reply
Hi Jason, The A.O. Smith 1 HP Round Flange Up Rate Motor (USQ1102) and the Hayward MaxFlo Tune Up Kit (GOKIT1) would be the replacement motor and kit for this model pump.
Reply
Hi, I have a burned out Hayward SPSP2805X7 Pumo and want to replace it with a slightly larger pump for better flow. What are the dimensional differences between my old pump and a Hayward SP2807x10 pump?
Reply
Hi Mike, The SP2807X10 model is 3/8" longer than the SP2805X7 because of the motor, other than that everything else is the same. Please make sure that you filter can handle the additional water flow prior to purchasing.
Reply
Are there any 2 speed or variable speed motors available for a Hayward SP2807X10?
Reply
Hello Robert, You can replace your 1hp Motor with a 1 HP Full Rate Two Speed Motor W/ Timer or a 1.65 HP Variable Speed Pool Pump Motor Round Flange. When changing out your motor, we strongly recommend you replace your seals as well. We have the Tune Up Kit Hayward MaxFlo with all the seals you need.
Reply
What's the difference between the SP2307x10 vs the SP2807x10?
Reply
Hi, Vincent. The body styles and performance of the pumps are the difference between the Super Pump and the Max-Flo pump. The Max-Flo pump performance is slightly higher than the Super Pump.
Reply
i need parts
Reply
Hi. Replacement parts are listed in the Hayward MaxFlo Parts Diagram page.
Reply
What a replacement for the : Hayward Max-Flo Pump 1 HP Single Speed Pump - SP2807X10 ?
Reply
Hi Ed, you may need to adjust the plumbing but the Waterway Champs SMF-110 model pool pump is a good replacement for the Hayward Max Flo model SP2807X10 pool pump.
Reply
