I am replacing an existing main drain cover and this one has the correct diameter measurement of 7-7/8". But I need to know the center to center measurements for the screw holes.
Reply
Thank you for the great question. The center-to-center measurement for this Main Cover screw holes is 6".
Reply
Does this cover have VGB compliant marked on the top? My inspector is adamant that I need one of these covers and I want to make sure he can see that I am up to code.
Reply
Yes, this cover does have the VGB label on it top and its service date for when you would need to replace it.
Reply
my installer says I need a whole new main drain including a sump. Does this product come with the sump?
Reply
No, this product does not come with the sump. If you need a new main drain with the cover, frame and sump included in this style you should review the following pages WG1051PAK2, WG1052AVPAK2, WG1053AVPAK2, or WG1054AVPAK2.
Reply
I am looking for a spa drain cover
Reply
Can you provide the manufacturer, model number and size spa drain cover you're looking for.
Reply
what is the gpm for the Model WG1030 AVG and life expectancy
Reply
Hi Terry, The WG1030 cover is rated 125 GPM Flow Floor (Horizontal) and 72 GPM Floor Wall (Vertical) installation. This item does not have a life expectancy.
Reply
Do you have the same cover in white color?
Thank you.
Reply
Yes, here is the link to the Frame & Cover 7 7/8" 2 Pack - WHITE.
Reply
Do you offer a drain cover with a lower profile?
Reply
Hi, Tony. Hayward does not have a lower profile cover.
Reply
I need a ring and cover. I found this number on the ring wg1048b also 250pm submbpegd was very hard to read.
Can you help?
Reply
Hi, Bob. The replacement cover and ring are listed on the Hayward Round Main Drain Parts page.
Reply
What is the distance of the screws, 6 inches?
Reply
Hi Michael, correct, the center-to-center measurement for this Main Cover screw holes is 6".
Reply
