I have a Compool CP3600 and my controller in the house is dead. What do I need to buy?
Reply
Hi Sam, You will need to purchase this upgrade kit along with the Easy Touch Control Panel (520549).
Reply
I bought a house with a Compool cp3600, but the poolside remote is broken. I would like to replace it with the EasyTouch Upgrade Kit and remote wireless control panel. I need to know if I can continue to use my existing cp3400 indoor control panel, or if I would have to replace that as well?
Reply
Hi Mitch, You will need to upgrade the controller and the poolside remote. You can choose from one of the Pentair Easy Touch Controls and Accessories.
Reply
If you replace the CP3800 with the upgrade (part 521107) do you have to replace the indoor control box?
Reply
Hi Gordie, This is the correct upgrade kit for the CP3800 and yes you will also have to replace the inside control box.
Reply
I have a Compool 3600 that needs an upgrade. How do I know if I need the kit with or without a transformer? What IS the transformer anyway? Thank you
Reply
Hi Simone, For the CP3600 unit you will need the EasyTouch Upgrade Kit without Transformer (521107).
Reply
I have a SP 100 Compool system that is dead, No lights on the inside control board, is there an upgrade to the Easy touch system that will work with this system, the low voltage to high voltage switches seem to work fine. I see there is an upgrade for the CP 100, the pictures of the CP 100 look very similar to the SP 100
Reply
Hello- Unfortunately, I would have to refer you to contact Pentair directly. The reason is there is an upgrade for the SP100 to the CP3810, which would be compatible with this upgrade kit, but there is no mention if you are able to skip that conversion kit and go directly to this one. Their number is 800-831-7133.
Reply
I have a Pentair Compool CP30/LX30 controller/power box without built-in circuit breaker. Which Compool upgrade kit do I need to convert to EasyTouch?
Is this item compatible to upgrade a Compool Cp3839 Pool-Spa controller?
Is it compatible with a Spa side remote?
What remote control panel is required? Wired? Non-wired?
Reply
Hi, Dan. Yes, this is compatible with the Compool CP3839 controller. It is also compatible with the iS4 Spa-Side or the SpaCommand Remote and the EasyTouch Wireless Controller Kit - 8 Function - 520547 and the EasyTouch Indoor Controller - 8 Function - 520549.
Reply
Hi I have compool cp 3800 that I need to get data wire from control box outside power center looks like a telephone wire but with 6 wires I can’t find it anywhere to buy.
Reply
Hi, Fred. You may be able to purchase that cable by the foot at a hardware store like Lowes and or The Home Depot.
Reply
