Does this unit come with a timer that would allow it to run 9pm to 7am and then shut off? If not, do you sell a time that could be integrated to it for this type of control?
Reply
Hi, Alex. This unit does not come with a timer and we don't carry one that will operate this unit.
Reply
for the 92k BTU how long does it take to warm 20k gallons 1 degree? 1 degree per hour ? 3 degrees in 3 hours.
Reply
Hello, Normally it is around 1 degree an hour, but there are a lot of variables you would have to add. Like the ourside temperature, or if you are using a solar blanket.
Reply
Would this electric heater work for a 16 by 32 in ground pool with 19,000 gallons in New Jersey. Or is a heat pump a better option as far efficiency? If so, any heat pump suggestsions? My gas line is too far from my pool to consider gas. Thanks from the garden state.
Reply
Mark, yes, the E3T Electric Digital 27kW Pool/Spa Heater - 017124 would be a good option for your 16 by 32 pool.
Reply
Hello, I have a 25,000 gallon pool and live in TN, would the 18kw model be sufficient to warm the pool in the spring and fall seasons? I do not plan on using this unit for winters use. Thanks!
Reply
Hi, Corey. The 18 kW unit will take some time to heat a 25,000 gallon pool. You can use the Electric Heater Sizing Chart - Pool Sizing to confirm which unit will best meet your needs.
Reply
Does this heat an inground pool and spa together? Is it duel? What did he a 20 x 40 inground pool and also a 10 x 10 spa outdoor?
Reply
Hi. This unit does not have a dual thermostat. It can heat one body of water at a time. If your spa has a spillover, while heating the spa it will spillover into the pool slowly heating it.
Reply
Hi,
Does it come with the Unions for connecting it, or do I need to order them on a new install? If so what size or can you recommend a product # or description?
Reply
The Raypak E3T does include the union connections.
Reply
I have a 23000 gallon 16x32 pool in North Florida. Would this unit be sufficient to allow for comfortable swimming in the spring and fall?
Reply
Hi Chris, we would recommend something much larger than this unit. See our Inground Pool Heater Sizing Chart and note that your 500 square foot pool would need a heater with at least 206,000 BTUs to get a 1 degree per hour rise in temperature. We would recommend something like this Raypak Classic Series Heat Pump 140,000 BTU - 016033 if you do not have natural gas or propane available.
Reply
Under specs it says 3: 40 amp breaker. It just requires one 40 Amp breaker correct?
Reply
Hello Rob. The Raypak E3T Electric Digital 27kW Pool & Spa Heater, 92,128 BTU, Titanium Element - 017124 requires a quantity of three (3) Double Pole 40 AMP Breakers and 200 AMP Electrical Service. Attached please find the E3T Installation and Operation Manual Please reference Section 8 - Electrical Connections, pages 7 & 8. Attached please also find the E3T Electric 3-Series Titanium product brochure. Please reference the product specifications identified in the page 4 chart.
Reply
