I need to replace my the capacitor on my 1.5HP pool pump. Do you carry the capacitor I need?
Reply
Please note that capacitors store an electric charge and should be handled with the utmost caution and care. We do not encourage handling a capacitor without any type of safety measures in place and highly recommend contacting a professional service company for repair/replacement. For those that feel comfortable changing the capacitor here's >How to replace a pool pump capacitor. In order to match up the capacitor you will need more specifications on the capacitor. You will need to match the voltage, the MFD, whether or not the capacitor is a >run or >start type and the actual dimensions of the capacitor body.
Reply
The capacitor I'm replacing from a STA-Rite (model XP-1241 120 VAC) pump motor is labeled as such: 20UF/ 330VAC 50HZ. What is a comparable sized capacitor you sell?
Reply
Hi Tony, The 20MFD 370 Volt Run Capacitor (RD-20-370) will be the correct replacement capacitor.
Reply
Hayward Super ll Pump 2HP Capacitator blew out. Gentec 97F9606 25uf +6 50/70Hz 370VAC RD-25-370 do you carry this or is there a correct substitute one.
Leslie Pools sold me one & pump only works from 10 min to 1 hr & shuts off overheated ??? Do I need a whole new motor ??
Reply
Hi Sherry, This capacitor is the correct replacement base off the info you've provided. If the motor is more than 5 years old I would recommend that you replace the entire motor.
Reply
Hi, My 2 HP Hayward SPX1615Z1MNS Maxrate Motor will not start, I can hear humming noise. Could it be the run capacitor problem? Or run capacitor doesn't effect starting the motor?
Reply
Hi Val, The Run Capacitor does not affect the motor starting just it's running capability. This motor does not have a start switch either so the windings are bad so you will have to replace the entire motor.
Reply
Checked my pool yesterday and found that my capacitor had actual blown up. Is this as simple as just replacing it.
Reply
Yes, Replacing a capacitor is quite easy. You will want to correctly identify and purchase a replacement capacitor from the markings on the shell. Here is a great How to video available on our website, How To Replace a Pool Pump Capacitor.
Reply
I have a 2 speed pump motor (Starite Ultimax 1016174) that was running well until the run(?) capacitor "blew out the top" with burning smell. This would be the replacement one, But, it was attached to a relay-looking thing within the cap cover that has some plastic case melting--might still be good, rest of visible wiring looks fine. Do you sell the relay? What does it do? Thanks, GC
Reply
Hi, George. The replay allows the motor the go from high to low speed, if you provide us with the spec off of the replay we can see if we have that part.
Reply
i have a STA-RITE 2 speed pump. The motor is only running on low speed, after checking I found the capacitor is bad and has blown up leaking fluid. The capacitor is a Genteq 25uf 97f9606 50/60Hz 370VAC +6 -6% model #628318-307? I am having trouble locating a replacement that matches all serial numbers. Am I missing something or what part do I need?
Reply
Good afternoon Ronald, Is the capacitor located on top of the motor or in the back? If it is a silver capacitor located on top then this would be the correct partCapacitor, Run Rd 25-370 (17586325) - 628318-307
Reply
I have a genteq 97f9604, 22.5 uf +6, 50/60Hz, 370VAC. Will the above replace my old capacitor?
Reply
Hi, John. Yes, this capacitor can replace your existing capacitor if it's the same physical size.
Reply
I need a replacement capacitor for my pump motor. I had a CSC 25UF +/-6% 370VAC/B 50/60HZ . The dimensions are 1.75" diameter and 3" in length. The CSC part number is 325P256H37M30N4X.
Reply
Hi, This is the correct replacement capacitor based on the specs provided.
Reply
How can i check to see if my capacitor is bad?
Reply
Hello Scott, when a capacitor goes bad it hums to test this Use an analog or digital volt meter. Both work in essentially the same way and are both appropriate for the job. Set the meter to 1k ohms to begin the test. Touch the two terminals with your ohms meter test leads. The basic check involves touching the test leads twice and comparing the reaction. Touch the test leads to the terminals and then reverse them.The needle in your meter should swing to 0 ohms and swing back to infinity on an analog meter, and should display open line every time that you reverse on a digital meter. If it does, you've got a live capacitor and your problems are elsewhere. If there is no difference the capacitor is dead.
Reply
I have a pentair 1hp pump, motor number: 196238/ pump model number: SF-N1-1A/340038. I am unable to find capacitor as it exploded and blew off. This appears to be the correct size in regards to the capacitor cover. Do you know if this is the correct one or if there is a way to find out. Thanks
Reply
Hi, Tim. You will need the 30MFD 370V Run Capacitor - 5VR0303 based on the current spec we have for that motor.
Reply
i have a pentair whisperflow 2hp 2 speed pump motor that will start in low speed but sometimes it just hums when i try to start it in highspeed, sometimes it starts
Reply
What is the part or model number of your motor so I can provide the correct capacitor for you?
Reply
Hi, I have a Pentair Whisper flow WFE-1 1hp pool pump with a motor from Magnetek part # 01-177450-03. I need a new run capacitor but the current one is so rusted I can't read the part #. Would this be the correct capacitor?
Reply
i have a flowmaster xp2 model 06020400-2 with emerson motor 155cxblr-968 what capacitor do i need
Reply
Hi, Tom Nelson. The T55CXBLR-968 motor uses the 50MFD-370VAC Run Capacitor - 628318-313.
Reply
I have a motor model #K48K2PA105C1 and need a new run capacitor. It appears that the Titan Pro 370 TRC25 is what I am looking for. Is that correct? Thanks
Reply
I have a century centurion 2.0hp part number 0-159988-06. Is this the correct capacitor?
Reply
The correct capacitor for that motor is the part number 628318-307.
Reply
What is the correct capacitor for a Pentair WFE-6?
Reply
I have a whisperflow pump/motor, the capacitor is not kicking in the high speed, it is a genteq 25 uf +-6% 50/60 HZ 370 VAC, can you let me know what you have as a replacement please?
thanks Norm
Reply
Hi, Norman. This is the correct replacement based on the info provided.
Reply
I need a capacitor for an Haywood pool pump model K48N2N106A1 serial 8B06. 2 1/2 HP. The capacitor is an CSC 325P256H37M30N4X
your capacitor label shows that it is a 25 MFD run capacitor; RUN CAPACITOR, 25 MFD - 628318-307 is the correct replacement
Reply
I have a hayward model no. k48n2n106a1 serial no. 8F05 what is correct replacement capacitor?
What are the run and start capacitors required for an A.O. Smith model K48K2PA105C1 from a Sta Rite model P4AE6E?
Reply
Hello,
I need two capacitors, the data from my old one:
1) CBB60 25uF 300 V.AC 50/60HZ
2) CBB60 50uF 300 V.AC 50/60HZ
Tell me which one to take.
Greetings
Reply
Hello, can you please provide us with the model, part, or catalog number of the motor?. Once we get those photos we can make the proper recommendation.
Reply
Would this be the correct RUN capacitor for a Century B668 (7-187400-20) motor? The capacitor that I am replacing is a CSC 628308-405 25.0uf +-6% 440VAC/B (picture included). Should I be concerned about the 440VAC vs 370VAC? I might have been running with the wrong capacitor for years.
Hi Rob, this is the correct replacement capacitor for your part number 628308-405. The original version is no longer available but this one can replace it.
Reply
Hi. I have a century b127 pump that I think needs a new capacitor (hums but won’t start & starts if you s haft by hand). Would this be the correct one? That’s.
Thank you for contacting Inyo Pools, Yes RUN CAPACITOR, 25 MFD - 628318-307 is the correct replacement capacitor.
Reply
I have a Century B227SE pool pump motor that just humms instead of starting. serial is 06714CH M56J, part 0-184980-23, 3/4 HP , SF 1.00
Volts 230/115, Amps 4.4/8.8
Do you have the replacement capacitors for it? (not sure if I need start and run)
Thanks
Hello Anne. The RUN CAPACITOR, 25 MFD - 628318-307 is the correct replacement capacitor for the Century Motors B227SE, 0-184980-23.
Reply
