Will this fit my Artesian above ground pool?
Reply
Hi Beth, If you have a Standard Inlet Fitting Which Looks Like This than this eyeball fitting would work with your pool.
Reply
My inlet valve Sp1419D broke the ring that keeps the directional eyeball in place.
I measure the female ring at 2" as well as the male threaded end which it screws onto. Do you have an SP1419D that is 3/4" by 2" female threads?
Reply
Hi Jim, All these inlets are the same except for the size of the eyeball. These Inlet Eyeball Fittings are meant to thread into one of these Wall Fittings depending on you pool type. They do not come in 2" female threads, but you might be referring to the Directional Lock Ring (SPX1419D1)
Reply
The eyeball . . does it come as pictured with the seat as well ? Three parts in the assembly?
Reply
Hi, The Hayward 3/4" Eyeball (SP1419D) does come as pictured, complete with the Eyeball, Lock Ring and Ball Seat.
Reply
Do they make a Directional Lock Ring (SPX1419D1) that is solid (no hole for the eyeball). To winterize my old pool, I would unscrew the eyeball and lock ring and replace it with a cover that just screwed on from inside the pool. My old one doesn't fit my new pool.
Reply
Hi, Chuck. There is a Threaded Cap - 25552-020-300 by CMP that can be used which we can special order.
Reply
Need 1-1/4 nut don't care what size eyeball
Reply
Hi Mark, Would it be possible for you to post a few photos with a measuring tape in the photos? Simply click the reply link below to upload your photos. This will allow us to recommend the proper part.
Reply
Can this part be ordered in gray?
Hi Mark, yes we carry these eyeball fittings in gray and multiple hole sizes. Please see our Custom Molded Products Inlet Eyeballs page for some options.
Reply
I am missing an eyeball and a locking ring, but I have no idea how to measure it?
Reply
Hello Mike. Pool return jet eyeballs are typically all the same size for any given pool. If you have multiple return jets, by measuring the diameter of the eyeball opening you can determine the size required to replace the one missing. A replacement return jet comes complete with an eyeball, lock ring, and ball seat. The ball seat is a standard 1.5-inch male threaded fitting that threads into the female pipe fitting in the side of the pool. The eyeball fits into the female socket and is held in place with the lock ring. Return jet eyeballs come in several diameters, 3/8, 1/2, 3/4, and 1 inch. Attached are pictures of return fittings as sample sizes. Eyeball, 1/2" Opening, White (25552.200) - 25552-200-000 Eyeball, 3/8" Opening, White (25552.100) - 25552-100-000
Reply
