is it right Screw for Impeller 355315
Reply
If your pump is the model Challenger then that is the correct screw for that impeller.
Reply
Is this a left hand threaded bolt? The old one broke upon replacement of motor. Do i need to replace it?
Reply
Hi Chis, This Impeller screw is left-handed thread. You do not need it but if you want to you can replace it.
Reply
Is this a left handed thread screw?
Reply
Hi Laurie, This impeller screw is a left-hand thread.
Reply
I was replacing my motor on my Pentair superflo. The bolt for the impeller is bent. it is a left handed thred does it have to be in the pump?
Reply
Hi, Curt. The impeller screw is left-hand threaded.
Reply
is this locking screw 5/16 thich. how many threads to the inch. Does it hold the impellar in place.
Reply
Hi, John, This Impeller Screw Fastener Size is 1/4" and the Thread Pitch is 20. It does keep the impeller secured to the motor shaft.
Reply
Will this impeller screw fita Challenger pumpp 3 hp.
Thanks
kostis
Reply
Yes this is the correct impeller screw for a 3 HP Challenger Pump.
Reply
I can’t get this screw out, any advice?
Hi Mary, sometimes using a small amount of muriatic acid will clean corrosion that could be causing the skew to stick. Also, WD40 or heat may also assist to break the screw loose.
Reply
