will this work on a two speed motor.
Reply
This part will not work on a two-speed motor. The corresponding two-speed motor part is no longer available.
Reply
How can you tell if you have a 2 psd or single sped motor?
Reply
The motor label RPM rating will state 3,450 for single speed or 3,450/1,725 for dual speed.
Reply
Is this the correct switch for a 3 hp Century 1081 pool pump model # ST1302V1?
Thank you
Reply
Hi, This Rotating Switch can be used with the ST1302V1 motor.
Reply
why does the speed rotating switch go on and off?
Reply
Can you be a little more specific with your question? Are you referring to electrically coming on and off, or disconnecting from the shaft and reconnecting? Please elaborate.
Reply
Are the 2 hp and 3 hp Governor switch the same part number? This is for an AO Smith motor
Reply
This part isn't specific to the horsepower of the pump, instead, it is based on the model that you have.
Reply
Can this switch be used on AO Smith 2.5 hp Model# K48N2N106A3 MOTOR, (Hayward Pump)
56J
3450 rpm
Thanks for your valuable time.
Reply
Hi, Kevin. Yes, this switch can be used with MOD # K48N2N106A3.
Reply
what is the screw measurement? thanks
Reply
Hi, Rewesh. Unfortunately, we do not have the specification of the screw.
Reply
How does the rotating switch work with the stationary swith
Reply
Hi, Robert. As the motor rotates the rotating switch and stationary switch will engage making contact with each other.
Reply
Dear,
My motor pump (BN33 7-181793-20) sometimes jerks during startup as if the stator (housing) wants to turn. What is it? Why?
Reply
Hello Alex, attached are two blogs that might help troubleshoot your motor. 8 Answers to “Why Is My Pool Pump Not Working?” and How To Determine Why a Motor Won't Start or Shuts Off.
Reply
