?     Asked on 3/17/2015by Inyo Visitor

what is the function of this tube,and what problems does it cause
 Reply

A  Answered on 3/17/2015 by InyoPools Product Specialist Wes B.

The air tube is attached inside the filter to the air valve, if not installed on the filter when you bleed the air out of the tank, it may cause pressure build up and cause various issues with the filter and pipes. If the pressure builds up to much it can cause the filter to crack or even blow apart, you should always keep the filter is working order and to the specifications the manufacture requires.
 Reply


?     Asked on 1/17/2016by Bobbie

Where is the air valve on the Hayward C1100 Star Clear Filter
 Reply

A  Answered on 1/18/2016 by InyoPools Product Specialist Lennox H.

Hi Bobbie, The Air Relief Valve is located  on the lid directly across from the pressure gauge.
 Reply


?     Asked on 3/25/2017by Peter

what does a Air tube on a Hayward do and how to replaced
 Reply

A  Answered on 3/27/2017 by InyoPools Product Specialist Lennox H.

Hi, Peter. The air tube acts as a vent to help remove air trapped in the filter and circulation system. There is a port that's located in the bottom of the filter that the tube slips into.
 Reply


?     Asked on 6/7/2017by Randall L Davidsen

Hayward C-1200 Filter - At the bottom is a un-screwable know which lets water out - do you have a hose that can connect to this to let excess water out of my pool?
 Reply

A  Answered on 6/7/2017 by InyoPools Product Specialist Hector F.

We do not, but you can take that knob to your local hardware store, purchase a standard garden hose spigot that matches that filter knob thread diameter, then replace the knob with it.
 Reply


?     Asked on 9/26/2017by DENISE

CAN I GET JUST THE OVAL BLACK RUBBER CONNECT WITH TWO HOLES THAT COMES WITH THE AIR TUBING FOR THE HAYWARD C1200 FILTER?
 Reply

A  Answered on 9/26/2017 by InyoPools Product Specialist Lennox H.

Hi, Denise. Unfortunately, that part is not sold separately. 
 Reply


?     Asked on 6/27/2018by Al

How do I install a new air relief tube? There is a small screw - where does it go?
 Reply

A  Answered on 6/30/2018 by InyoPools Product Specialist Lennox H.

Hi, Al. This Air Tube can be used on a few different filters, some requiring different installation instruction. Please provide the model of your filter so that we can assist you. 
 Reply


?     Asked on 11/29/2020by MAu

How do I replace this tube on the Hayward C1200?
 Reply

A  Answered on 11/30/2020 by InyoPools Product Specialist Megan C.

Hello Mau, this air tube just sits in a small hole on the bottom of the filter body in the Hayward Star-Clear model C1200 cartridge filter.
 Reply

  • Commented on 11/30/2020 by Product Owner

    Is the tube secured in some way? Or do I simply slide it on?
     Reply


?     Asked on 4/11/2022by Merle GaVITT SR.

I asked once before for this information and I lost it. (sorry) Would you please send me again the (Inside dimensions) x (outside dimensions) x Length for the Hayward c1200, cx1100z4 auto air relief tube. I think you said: 1/4 " ID x 3/8" OD x Length 26 1/2 " Thanking you in advance for you kindness. I am a Korean War Veteran and appreciate you helping me. :-)
 Reply

A  Answered on 4/12/2022 by InyoPools Product Specialist Craig C.

Hello Merle.  The Hayward Pool Products Air Tube dimensions are  Tube Length - 26 1/2"    ID -1/4"     OD - 3/8"
 Reply