1. Home
  2. Pool Parts
  3. Cleaner Parts
  4. Maytronics Dolphin Stinger
  5. 3295-454
  6. Q & As
?     Asked on 3/5/2015 by Simon

Will this fit a Dynamic Pro X?
 Reply

A  Answered on 3/5/2015 by InyoPools Product Specialist Robert M.

Hello Simon - Part number 3884997 (3295-454) is the correct guide wheel for the Dynamic ProX.
 Reply


?     Asked on 4/1/2016 by Jose

Does wheel come with bearings
 Reply

A  Answered on 4/2/2016 by InyoPools Product Specialist Lennox H.

Hi Jose, This wheel does have bearings.
 Reply


?     Asked on 7/9/2016 by Randy

Looking for bearing for my dolphin diagnostic 2001
 Reply

A  Answered on 7/16/2016 by InyoPools Product Specialist Lennox H.

Hi Randy, This Wheel Bearing can be used with the Dolphin Diagnostic 2001.
 Reply


?     Asked on 1/10/2017 by Ron

I have a Leslie dolphn deluxe 4, I have found the chasis replacement part i need (9980630) but I dont know where to find other parts such as
 Reply

A  Answered on 1/11/2017 by InyoPools Product Specialist Stacey M.

Hello Ron, the 9980630 is FRAME 2008 it would be a special order which would be 2-3 weeks.  Are there any other replacements you need?
 Reply


?     Asked on 8/4/2017 by Inyo Visitor

One of the guide wheels on my Dolphin Nautilus broke and lost some of its bearings into the pool. Do I need to replace all four guide wheels at once (so they are of the same age/wear), or can I just replace the one? The bot seems to be working well otherwise and I wouldn't have known that anything was wrong with it if I had not found the bearings in the pool. I have since stopped using the bot though, until I can replace the Guide Wheel. Thanks.
 Reply

A  Answered on 8/9/2017 by InyoPools Product Specialist Lennox H.

Hi. It would be better to replace all of the bearings if you're able to or just the one that is bad. 
 Reply


?     Asked on 4/8/2019 by Robert Baxendell

Are the being rings inside the wheel guide supposed to split? Cannot tell if mine are broken since they appear split so uniformly????
 Reply

A  Answered on 4/8/2019 by InyoPools Product Specialist Lennox H.

Hi, Robert. The inner part of this guide wheel is a solid unbroken ring with groves on the outer portion as shown in the product images.
 Reply


?     Asked on 2/8/2020 by Charlie Bronikowsky

I have a Dolphin DX 6 and i have found several stainless steel ball bearings inside the cleaner housing. I first noticed this when i took it out to clean it and i heard a rattling sound inside the cleaner. The cleaner seems to be working ok . the only part i see in the parts diagram that would have ball bearings are the 4 wheels. Are there any other parts that would have ball bearings that could show up inside the cleaner filter compartment ?
 Reply

A  Answered on 2/11/2020 by InyoPools Product Specialist Lennox H.

Hi, Charlie. The Guide Wheel - 3884997, Drive Pulley - 3883645,  and Wheel Bearing (Single) - 3884073-ASSY all use ball bearings. 
 Reply