Does your AqualFlo Gecko Alliance CMHP 1/15 hp come in 230 volt, same configuration...?
Tuesday, October 13, 2015 3:18 pm est.
Reply
Hi Jack, The Gecko Alliance Circmaster CMHP 1/15 Hp 230 V 1 Speed Pump would be the 230 volt model.
Reply
Is this pump an exact replacement for a Model 02093460-2 code 02154
Reply
Hi Jim, The AquaFlo Gecko Alliance CMHP Pump 1/15HP 120 V (020930002010) would be the exact replacement for the 02093460-2 model.
Reply
My pump inlet & outlet are male & measure approx. 2" diameter - does that match this pump? I see that there is an adapter fitting and it is described as 1.5"
thanks,
Terry
Reply
Terry,The inlet and outlet for this pump is 1.5". Make sure you are measuring the inner diameter to determine your pipe size.
Reply
how many gpm does this pump have
Reply
Hi, Fred. The GPM of this pump will be based on the Differential Pressure. You can view the CMHP Performance Chart to view flow rate.
Reply
Hello
Is this an exact replacement for k55mygjn-8255? If not, what fitting adapters will I need with it?
Thanks!
Reply
Hi, This is the exact replacement for the K55MYGJN-8255 pump, the unions are included with the pump.
Reply
We are looking for a pump to replace one in our hot tub. Will this work to replace a US motors 156 spa motor ? model K55MYGJN-8255
HP 1/15 S.F. 1.0 RPM 1725
Volts 115 HZ60
Reply
Hi, Margaret. Yes, this AquaFlo Gecko Alliance CMHP Pump - 02093000-2010 is the replacement for the K55MYGJN-8255.
Reply
I need a replacement for a Emerson 1563 model k55mygrd-8367 and can I remove bolts and rotate discharge to a different angle
Reply
Hi, Glenn. The CMHP Pump 1/15HP 230V - 02093001-2010 will be the correct replacement. The discharge can be rotated to a different orientation.
Reply
Hello, I'm looking for a hot tub pump, model K55MYGN-8255, this is what I found on the pump. also found these numbers model # 02410684-2 code 03202 serial # 061188-174
What am I looking for on your website? please.
Reply
Hi, Lorraine. You can use this AquaFlo Gecko Alliance CMHP Pump to replace your old AquaFlo Gecko Alliance CMVP model.
Reply
My cireculating pump on an older Master Spa (Emerson) K55MYGJN-8255 is leaking. It's a side discharge, but the intake (in-line with the motor shaft) is 2" (please see photo). Does this motor come in a variant with a 2" intake? Or, do I need to take the pump off the old motor (risky?)?
Also, there's a black plastic rectangular component that I believe helps regular water to the jets. There's a marking of "PROZONE V-3" on the top. What is this component called so I can replace it? (2nd picture)
The CMHP is not available with a 2 inch intake. From your picture it looks like they have a bushing attached to the front of the pump cover to get to the 2inch pipe. You should be able to remove that white adapter and install it on the new pump. The second picture is hard to see, but Prozone is a o-zone/uv supplier and not part of the Gecko pump line. I believe what is shown is an in line venture. This would create a suction with the pump running to pull ozone from the Prozone system and inject it into the spa via the return lines.
Reply
