I have 2G lights in my pool and want to put a 3G light in my spa. Will the 2G and 3G versions synchronize with one another?
Reply
According to the manufacturer, the 2G and 3G versions will not synchronize with one another. To have the lights on the same color rotation, you would need to have the same version in both your pool and spa.
Reply
What is the difference between the G3 and the G2 LED Light?
Reply
The G3 uses newer technology which gives you brighter light output than the G2, also the older technology on the G2 let's you see individual rays of light where the new technology on the G3 has a much smoother light output. You may view or purchase either light here >http://www.inyopools.com/lights_jjelectronics.aspx
Reply
For a color-changing LED light, how do I switch between the different settings with just a standard light switch?
Reply
The LED lights are designed to move to the next programmed setting each time you turn the switch on and off. This will toggle through the different color settings and shows.
Reply
Trying to figure out if this is compatible with Pentair Series 78350XXX, 78351XXX 100 Watt, 12V Bulb type T3 GY6.35. Thank you
Reply
Hi Steve, The Color Splash LED 2G Pool Lamp, 12V is not compatible with the Pentair Series 78350XXX, 78351XXX light fixture.
Reply
NOT my question! I know they can be 120v or 12v! My question is: What is the WATTAGE of the 12v G2 and, Second, what is the WATTAGE of the 12v G3? I'm trying to compare the WATTAGE of the G2 at 12v and G3 at 12v. What is the difference in light output (Lumens) of the G2 and G3 both at 12v?
Reply
Is this comparable to replace a Galaxy led lamp igp231
Reply
Hi, The Color Splash LED 2G Pool Lamp, 12V (LPL2030122) is not comparable to the IGP231 bulb, the voltage are different. If you can provide the manufacture, model and voltage of the light fixture you currently have I can find out if there is a Color Splash bulb that would work with your fixture.
Reply
I am researching to replace two inground pool lights and twelve landscaping lights to LEDs. I would like them all to sychronize in changing colors - do you have any recommendations?
Reply
Hi Dave, These bulbs are designed for use in selected underwater light fixtures. We don't have led bulbs for landscaping lights.
Reply
I have Hayward color logic for in ground pool fixture model number SP0524SLED100 IT IS 50W / 12 V CAN I CHANG THE LIGHT BULB & IF YES HOW MUCH WOULD IT BE ? ALSO IF I CAN NOT CHANGE THE BULB HOW MUCH WOULD BE TO FIX IT IS IT CAN BE FIXED? THANKS
Reply
Hi, Mahmoud. Unfortunately, the Hayward ColorLogic lights do not have replacement bulbs or can be repaired. You will have to replace the entire light fixture.
Reply
My LPL-2030-12-2 just went out and im looking for a color changing bulb that will be a suitable sub for the same fixture since this one is no longer avail. any suggestions?
Reply
Good Afternoon- The LED Pool Bulb Color Changing 12V 35W - PL5808 would be a good color changing replacement for the LPL-2030-12-2.
Reply
Good afteroon,I have 20 lamps installed in a single 600 watt transformer branched out in 5 circuits and when I try to sincronize
them I can not do it .for instance , I have 3 lamps in one branch snd only 2 give the same color and the other one is diferent even though I set them in the re
set mode, can you tell me what could be wrong?
Reply
We apologize for the inconvenience, however, we were unable to obtain an answer to your question from the manufacturer. We suggest contacting them directly.
Reply
