This guide discusses the common problems related to a motor that won't start or once it does start shuts off after 5 minutes.
Apr 22, 2017 ... ... turns a bit, then the overload protector kicks in and the motor shuts off. I replace both run capacitor and start capacitor and no changes ...
Jul 16, 2015 ... If your motor stops cold in its tracks then it is likely overloading the circuit or tripping a thermal fuse. Both a big no-no and should be ...
This guide discusses the common problems related to a motor that runs very hot. If not corrected, a continually overheated motor will fail. Note that it is normal for a motor to run somewhat hot to th...
The Thermal Overload Protector on a motor monitors both motor temperature and current. When either exceeds the motor's limit, the Protector will shut the motor off until it cools. Overheating or h...
Franklin Electric Motor Switches/Parts - INYOpools.com has the largest selection of swimming pool and spa replacement parts with over 70000 parts in stock.
Jun 8, 2016 ... When I turn off the pump motor, I see the water leaving my pump basket immediately. But here is what I can't figure out. If I start the motor ...
When the motor gets hot enough, the thermal sensor will cut it off until it cools down. Once it cools down, the motor should automatically turn back on. Here ...
May 30, 2019 ... It is an exact replacement of stock motor. I swapped the motors and seals, started it up on high…it ran…turned it off…switched to low…and ...
This guide discusses the two kinds of capacitors that could be used on pool pump motors: start capacitors and run capacitors. It also addresses how to know a capacitor is failing and how to replace it...
