Fiber Optics
Light Sticks Guide
Fiber Optics Light Stick Installation Guide
1.Place light sticks firmly into the ground with the fiber optics
attached and the coupler assembled. The top of the light stick
should extend 2” above the final concrete grade. 2.Pour the concrete.
3.Finish the concrete. 4.When the concrete has set, cut the
light stick flush at the concrete surface with a saw or a grinder. Use
a sander to produce a smooth finish on the light stick.
Fiber Optic Lighting Layout
In the situation shown below there is both landscape and underwater lighting. 2 Illuminators are used because the maximum capacity of 550 Strands is reached with this application. The first Illuminator is plugged into the underwater lighting only (75 +75+ 150 + 150 + 100 = 550). The second Illuminator is used with the landscape lighting and the perimeter lighting (75+150+75+120+84= 504). The Perimeter Fiber has a cable of 42 Strands, but is plugged into the Illuminator at the start and end of the cable thus twice the amount of the Fiber or 84 Strands.
Click here for a list of all of our Fiber Optics from Super Vision.
|