Fiber Optics Paver Lighting

Paver Lighting can be installed in several different types of applications. The more popular application is to put them directly into brick patios. The dimensions of the paver light is about equal to the smaller bricks used in brick patios. The first step is to attach the Fiber to the Paver Light (1). Next place the paver into the bricks (2). Make sure there is a notch cut out of your brick that allows for your brick to set over the endglow fiber optic cable and run the cable back to the Illuminator (3,4).

Fiber Optic Lighting Layout
In the situation shown below there is both landscape and underwater lighting. 2 Illuminators are used because the maximum capacity of 550 Strands is reached with this application. The first Illuminator is plugged into the underwater lighting only (75 +75+ 150 + 150 + 100 = 550). The second Illuminator is used with the landscape lighting and the perimeter lighting (75+150+75+120+84= 504). The Perimeter Fiber has a cable of 42 Strands, but is plugged into the Illuminator at the start and end of the cable thus twice the amount of the Fiber or 84 Strands.

Click here for a list of all of our Fiber Optics from Super Vision.