Search by Keyword
or Part #:

     

Shop by Category:


New Home with a Spa

above ground pools

You have just moved into a new home with a spa . Now you are wondering such questions on how do I maintain and operate my spa. What does the pump do? How do I clean my spa? What chemicals do I need in my spa? The information we provide in this section will give you a better idea on how your pool works and will help you get the most enjoyment out of your spa.

We will start off with what is the basics on what you need to make your spa work, and then get into more advanced supplies that will make operating your spa easier.

Below is a typical set up of most spas. Please note setup will vary depending on spa size and manufacturer.


Basic Spa Overhead Products


Basic Spa Insides


ADJUSTING MASSAGE JETS
The massage jets may be adjusted for both volume and direction.
To adjust the jet for direction simply rotate the jet’s eyeball fitting in the direction desired.

To adjust the jet’s flow rate, rotate the jet’s outer faceplate about 1/4 turn
counterclockwise to increase the flow or clockwise to decrease the flow. (DO NOT FORCE)

   
SUCTION FITTINGS
Keeping the suction fitting covers clean and clear of all obstructions is critical in order to have a safe operation of the spa. See the safety instructions rules for details.(page 1)
   
SURFACE SKIM FILTER
The spa’s automatic surface skim filter is designed to remove floating debris
and contaminants such as body lotions by drawing water through a specially formulated filter cartridge element. It is critical that this element be routinely cleaned.
   
To Clean the Cartridge:
1. Turn Spa Off.
2. Remove the filter cover.
3. Turn cartridge counterclockwise and pull up.
4. Remove the cartridge element and thoroughly rinse with a garden hose until element is free from dirt and debris.
5. Return the cartridge to the filter well by following steps 1 - 4 in reverse order.
   
AIR INJECTION VENTURI ADJUSTMENT
Air injection into the massage jet water flow may be controlled by manipulation of the venturi dials located on either side of the spa. Each dial is independent and controls up to 5 jets respectively.

Click here for Spa Chemistry