$466.99

Qty:

Details

Top

Part # 34-109-1022

Manufacturer Code 0035F88C

Alternate Part #'s 0033F88C, 306350, NR2-C, BB0035F88C

Product Description

Gemini Plus II VS, 115v, 1-1/2". For high flow bath jet systems

  • Supplied with unions
  • The Gemini Bath Control is necessary to provide variable speed
  • Low-profile pumps are not available
  • Length = 12-11/16
  • Width = 5-11/16
  • Discharge Height = 7-3/4
  • Overall Height = 7-3/4"
  • California Title 20 Compliant

*Please note that this model does not come with an air switch

Product Specifications

HP:
3/4 HP
Volts:
115 V
Discharge Port:
1-1/2 in.
Intake Port:
1-1/2 in.
Discharge Location:
Center
Speed:
Single
Amps:
8.5 amp
Model:
Gemini Plus II
Top

?     Asked on 5/29/2017by Inyo Visitor

What's the model number?
 Reply

A  Answered on 5/29/2017 by InyoPools Product Specialist Patrick P.

The manufacturer model # for this pump is 0035F88C
 Reply


?     Asked on 7/17/2017by Tim

Is this the replacement pump for R75A-C
 Reply

A  Answered on 7/17/2017 by InyoPools Product Specialist Lennox H.

Hi, Tim. The Gemini II Plus Pump - 0034F88C is the replacement for the R75A-C model pump. 
 Reply


?     Asked on 12/2/2018by Mike

Does this pump need15amp or20amp service
 Reply

A  Answered on 12/3/2018 by InyoPools Product Specialist Lennox H.

Hi, Mike. You can use a 15 amp breaker for this pump if it will be the only equipment service by that breaker. 
 Reply


?     Asked on 12/15/2018by Michael

I have an ITT Marlon Gemini plus pump. It’s specifications are 0001300, 10.5 Amps, .75 hp, R75. It is currently configured to a Cryli Junior tub with six jets. I tried to get into the impeller, but was unsuccessful. Any suggestions on which model I should use as a replacement?
 Reply

A  Answered on 12/17/2018 by InyoPools Product Specialist Joe S.

Good afternoon, Michael, for a replacement based off your specs you would want to buy Gemini II Plus Pump 3/4 Hp 110v W/ Air Switch & Cord - 0060F88C
 Reply


?     Asked on 8/22/2019by Inyo Visitor

I have a pump Spec 0039E00C 120 volts, 50/60 hz and 3/4hp model number R75VS19C. Was wondering what pump i would need to replace this with and also need a vacuum switch to go with it. Currently being used on a jacuzzi
 Reply

A  Answered on 8/22/2019 by Industry Professional

The 34-109-1022 is the replacement, however it may not work with your existing controller if it is electronic. The newer style VS pumps only work with the new Balboa Titan control & topside. See 58-109-1000 as well as the 34-109-1022 pump. If you just have an air button & air switch to turn the pump on/off you can use # 34-109-1020
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)