By Balboa


Details

Top

Model # 5151-210

Manufacturer Code 0034F88C

Alternate Part #'s 0034F00C, 0034F88C, 0035F00C, 0035F88C, NR1-C, NR1A-C, NR2-C, NR2A-C, NRU2A-C, NRU2AC, R75A-C, 34-109-1020

Product Description

Gemini Plus Bath Pump II, 115v, 1-1/2" With Air Switch. For high flow bath jet systems

    • 115V
    • 8.5 Amps
    • 3/4 HP
    • 1.5" Suction and Discharge Ports
    • 115V
    • Supplied with unions
    • The Titan Bath Control is necessary to provide variable speed
    • Low-profile pumps are not available
    • Length = 12-11/16"
    • Width = 5-11/16"
    • Discharge Height = 7-3/4"
    • Overall Height = 7-3/4"



  • California Title 20 Compliant

Please note: If you are replacing an existing bathtub pump, you should replace it with the same or similar horsepower and amp rating as to your existing pump, if you are happy with the current forcefulness of the water coming out of your jets. Check the markings on the pump you are replacing. In general, bathtub pump motors should have 1 HP for every 4 to 6 standard size jets. More horsepower is not better. Overpowering your jets with too much horsepower could damage your plumbing, your equipment, or even you! So, it is important to get the right-sized motor for your bathtub.

Product Specifications

Manufacturer:
ITT/Balboa
Model:
Gemini Plus II
Type:
Bath Pump Complete
HP:
0.75 HP
Volts:
115 V
Amps:
8.5
Plumbing Port Type:
Male Buttress Thread (mbt)
Plumbing Size:
1-1/2 in.
Top

?     Asked on 3/24/2017by mark

I have this pump/motor assembly. The shaft seal is leaking. Is a seal available for this unit? Is the pump available without motor? Can I use a different pump/motor assembly that the piping will still reconnect?
 Reply

A  Answered on 3/24/2017 by InyoPools Product Specialist Lennox H.

Hi, Mark. Unfortunately, replacement parts are not available for these pumps. This NRU2A-C can be replaced with model # 0034F88C.
 Reply