Part # NBP2061

Manufacturer Code 1184282

Dimensions 7/8" x 7/16"

Alternate Part #'s 1050000054, 1184282, 1184285

Product Description

Consists of 34 nuts and 34 bolts

For More Above Ground Pool Parts

Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort  that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below.  Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.

Click here to submit the information requested below.

*   Size of the pool & approximate age of the pool?

*   Image of the pool wall.

*   Image of the upright

*   Image of the top rail connection to the upright.

*   Name & age of the pool (if known) 


?     Asked on 1/27/2012by Guest

I purchased a used pool and need to replace some of the parts. Will these parts fit any pool?

A  Answered on 1/27/2012 by InyoPools Product Specialist Patrick P.

Before placing an order you will need to know the manufacturer and model of your pool. Pool parts are not universal and are not guaranteed to fit any model other than the one listed.

?     Asked on 9/15/2015by David Enns

Does this kit also have the wall joiner bar also I need one for an Atlantic pool or do you carry any for the Atlantic pool systems Thanks

A  Answered on 9/17/2015 by InyoPools Product Specialist Bob D.

Hi David. This does not include the reinforcing bar, just the nuts and bolts. We do carry reinforcing bars. If you could give us a part number or photo and you know the dimensions we may be able to find a match for you. Thank you for the inquiry.

?     Asked on 6/2/2017by Richard Treglia

Hi, I have a 16x24x52 doughboy desert spring pool which i want to repair by replacing a section of the wall. Can you tell me how many screws i should use from top to bottom and the spacing. Do i need to put any additional reinforcement also?

A  Answered on 6/3/2017 by InyoPools Product Specialist Lennox H.

Hi, David. Unfortunately, I can not tell you how many screws is used on Doughboy pools. We do not have any specs or parts for Doughboy pools.

?     Asked on 7/24/2019by Cris

What size screws are these? The ones I need is just under 5/16".


A  Answered on 7/24/2019 by InyoPools Product Specialist Lennox H.

Hi, Cris. It uses Thruss phill 18-8 bolts. 


Est. Repair Time

4 to 8 hrs

Tools Needed

Screwdriver, Socket Set

Had a 20 year old pool. Needed a ton of replacements.

Written on 4/20/2021 by Guest

Pulled down an old pool from another location then brought it to my property. It needed all new hardware.

Were these instructions helpful?